Description
If you're loading your own .458 SOCOM and want rounds that drop in straight and shoot consistently, this is the seating die that gets it done. It's a single Hornady Custom Grade seater built around their in-line bullet seating system, which is the real heart of the thing. Instead of just shoving a bullet into a case and hoping it goes in straight, the die holds the bullet, case neck, and seating stem in alignment inside a floating sleeve before the bullet ever enters the neck. That little detail makes a noticeable difference in runout and overall consistency, which matters a lot with a big, heavy .458 projectile.
What Sets the 458 SOCOM Custom Grade Seater Apart
The seater uses a floating bullet alignment sleeve and a floating steel seating stem to pre-align everything, with a built-in crimper if you want to roll a crimp at the same time you seat. Seating depth is handled through the seater adjustment screw, so dialing in your cartridge overall length is quick and repeatable. There's also an o-ring compression lock that gives the adjustment the right tension, meaning your settings stay where you put them instead of drifting mid-session.
Built for the Long Haul
Hornady machines these dies to a high internal finish, and they back the Custom Grade line with a guarantee against breaking or wearing out under normal use. The locking retainer ring pops off in seconds, so cleaning out the sleeve and stem after a messy loading session is painless. The die ships with Hornady's Sure-Loc lock ring installed, which clamps evenly around the die body and tightens without the screw biting into the threads, so you're not chewing up your die over time.
Keep in mind this is the seating die by itself, not a full two-die set, so you'll want a sizing die to go with it if you're building a complete .458 SOCOM setup. For anyone already running Hornady gear or just wanting a proven seater for their big-bore AR loads, it's a solid, no-drama choice.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 044190
- UPC: 090255441901
- Cartridge: .458 SOCOM
- Bullet Diameter: .458
- Die Type: Bullet Seating Die
- Product Line: Custom Grade (New Dimension)
- Firearm Type: Rifle
- Alignment System: In-line floating bullet alignment sleeve
- Seating Stem: Floating steel
- Crimp: Built-in crimper
- Lock Ring: Sure-Loc, installed
- Quantity: 1 seating die
What’s Included
- Hornady Custom Grade .458 SOCOM bullet seating die
- Sure-Loc lock ring (installed)
- Storage box
Frequently Asked Questions
Is this a complete die set or just the 458 SOCOM seating die?
This is the seating die by itself, not a two-die or three-die set. If you're building a full .458 SOCOM reloading setup, you'll also need a sizing die to size and deprime your brass. Plenty of folks buy the seater on its own to replace or upgrade just the seating portion of their bench.
Can the 458 SOCOM seating die crimp as it seats?
Yes, the Custom Grade seater has a built-in crimper so you can apply a crimp in the same stroke if you want one. You can also back it off and run no crimp at all with a simple adjustment. For a big-bore cartridge like .458 SOCOM running through an AR, a lot of loaders like having that crimp option available.
What makes the Hornady Custom Grade seater produce straighter rounds?
The die uses an in-line bullet seating system with a floating alignment sleeve and floating steel seating stem. These hold the bullet, case neck, and stem in alignment inside the sleeve before the bullet ever enters the case neck, which cuts down on runout. The result is more concentric ammo and better consistency downrange.
Does the die come with a lock ring, and will it fit standard presses?
It ships with the Hornady Sure-Loc lock ring already installed. That ring clamps around the die and tightens without the screw contacting the threads, so you won't bugger up the die body. It uses the standard 7/8-14 thread, so it fits common single-stage and turret presses.




Reviews
There are no reviews yet.