Description
The Crimson Trace LG-362 brings laser targeting to your S&W M&P M2.0 Full-Size or Compact with a purpose-built design that feels like part of the gun from day one. Unlike universal laser solutions, this Laserguard is engineered specifically for the M&P platform, clamping securely to both the trigger guard and accessory rail for rock-solid mounting that won't shift after firing.
What sets this system apart is the Instinctive Activation technology. The activation pad sits naturally on the front strap where your middle finger naturally falls. Grip the pistol normally, and the laser automatically powers on without conscious thought. Ambidextrous by design, it works smoothly whether you're right or left-handed. The 5mW red laser dot creates a clean reference point at typical defensive distances, and you're looking at four hours of battery life from two included 2032 batteries.
LG-362 Installation and Adjustment
Setting up the LG-362 takes maybe ten minutes. The laser comes factory-sighted at 50 feet, so you can start using it right away, but it's fully adjustable for windage and elevation using the included Allen wrench. Two small screws on the housing let you dial everything in perfectly to your pistol and shooting style. The polymer construction is tough enough for regular carry or duty use, and the overmolded grip texture matches the M&P's ergonomic design.
Laser Performance and Practical Use
This is a working laser, not a training toy. At typical defensive distances (3 to 15 yards), the dot is bright and easy to see in most lighting conditions. In bright daylight, you might lose it beyond 20 yards or so—that's just physics with red lasers—but that's way outside defensive range anyway. The laser works best as a supplement to your iron sights, not a replacement. Keep your front and rear sights sharp because any light source can fail, and a laser only helps if it's turned on and the battery hasn't died.
Key Specifications
- Model: LG-362
- Manufacturer: Crimson Trace
- Manufacturer Part Number: LG-362
- UPC: 610242008599
- Laser Color: Red
- Laser Output: 5mW
- Dot Size: 0.50 inches at 50 feet
- Activation: Instinctive (Front Pressure Pad)
- Mount Type: Trigger Guard and Accessory Rail
- Battery Type: Two 2032 lithium
- Battery Life: 4 hours
- Adjustments: Windage and Elevation
- Material: Polymer with overmolded grip
- Factory Sight Distance: 50 feet
- Warranty: 3-year limited
- Compatibility: Smith & Wesson M&P M2.0 Full-Size and Compact (9mm, .40 S&W, .45 ACP)
What’s Included
- Crimson Trace LG-362 Laserguard laser sight assembly
- Two 2032 lithium batteries
- 0.050 inch hex wrench (Allen wrench) for adjustments and installation
- Aperture warning label
- Danger warning label
- Installation guide and owner's manual
Frequently Asked Questions
Will the LG-362 fit my M&P holster?
The trigger guard mount adds bulk to the front of your pistol, so standard M&P holsters designed without laser accommodation won't work. You'll need a holster that's either designed to accept trigger guard lasers or uses an adjustable mounting system. Some universal holsters and modern hybrid designs can accommodate it, but verify before purchasing.
How long does installation take?
About ten minutes if you follow the manual. Install the batteries first, then slide the laser under the trigger guard, hook the two halves together, and tighten the three provided screws with the included Allen wrench. No gunsmithing required, and the fit is snug right out of the box.
Can I see the laser dot in daylight?
Yes, in typical shooting distances, though red lasers become harder to see in bright sunlight the farther out you go. Beyond 15-20 yards in bright daylight, the dot fades. This isn't a limitation of the LG-362 specifically—it's how red lasers work. The laser shines brightest and most useful at defensive ranges and in low-light conditions.
Does the LG-362 come sighted in?
Factory-sighted at 50 feet, which is a solid baseline. Most users can pick it up and go straight to the range. If your pistol or shooting setup needs adjustment, the windage and elevation screws let you dial it in perfectly using the included Allen wrench. The adjustment is straightforward and takes just a few minutes.




Reviews
There are no reviews yet.