0
0

CMC Triggers Goldfinger Flat Single-Stage AR-15 Trigger 3.5 lb

UPC: 850040016017

$193.50

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The CMC Triggers Goldfinger takes the guesswork out of upgrading your fire control group. It ships as a single self-contained cassette, so instead of fussing with loose hammers, springs, and disconnectors, you knock out your old pins, drop the unit in, and pin it back down. The gold finish is the eye-catcher, but the real story is what happens when you press the shoe: a clean, single-stage break with no mushy takeup and a reset you can feel through your finger.

What Sets the Goldfinger Flat Trigger Apart

CMC has been building drop-in AR triggers since 2003, and that experience shows in the details. The Goldfinger is built from 8620 alloy steel and S7 tool steel, machined to tolerances of plus or minus .001 inch. CMC runs a proprietary process on the sear engagement surfaces that leaves a much finer 1-2 RMS finish than the rougher surfaces you get from typical EDM machining, and that polish is a big reason the pull comes across so smooth with no grit or creep before the hammer drops.

Dialing In the Goldfinger Trigger Pull

The pull weight is factory preset at 3.5 pounds and is not user adjustable, which is honestly a plus for a lot of folks who just want a proven, consistent break without dialing on set screws. The flat trigger bow lets your finger come to rest in the same spot every time, so each pull mirrors the last for better consistency downrange. Minimal lock time comes from a controlled hammer weight and balance paired with a rocket wire hammer spring, and it runs reliably whether you feed it commercial or military-grade ammo.

Fitment You Should Know

This version is a small pin (.154 inch) trigger, which covers the vast majority of mil-spec AR-15 and AR-10 lowers on the market. It fits everything except most Colts, though Colts made before 1991 or after 2009 will run small pins just fine. If you are unsure, pop a pin partway out and measure it before ordering. Every Goldfinger is hand assembled and hand tested before it leaves the CMC facility in Texas, and it includes an anti-walk pin set to keep things locked in place.

Key Specifications

  • Manufacturer: CMC Triggers
  • Manufacturer Part Number: 91503GF
  • UPC: 850040016017
  • Model: Drop-In
  • Trigger Type: Single-Stage
  • Bow Shape: Flat (Signature Flat Bow)
  • Pull Weight: 3.5 lb, factory preset (non-adjustable)
  • Pin Size: Small Pin (.154 in)
  • Fitment: Mil-Spec AR-15 and AR-10 Lower Receivers
  • Construction: 8620 Alloy Steel and S7 Tool Steel
  • Machined Tolerance: +/- .001 in
  • Finish: Gold
  • Hand: Ambidextrous
  • Length: 7.77 in
  • Assembly: Self-Contained One-Piece, Hand Assembled and Tested

What’s Included

  • CMC Goldfinger single-stage flat drop-in trigger group
  • CMC anti-walk pin set

Frequently Asked Questions

Does the Goldfinger trigger fit both AR-15 and AR-10 rifles?

Yes. This small pin (.154 inch) Goldfinger drops into mil-spec AR-15 and AR-10 lower receivers, which covers the large majority of platforms on the market. The main exception is most Colts, though Colts built before 1991 or after 2009 take small pins and will work fine.

Can I adjust the pull weight on the CMC Goldfinger?

No, the pull weight is preset at the factory to 3.5 pounds and is not user adjustable. For a lot of shooters that is a benefit, since you get a consistent, proven break right out of the package without fiddling with set screws. If it ever needs service, CMC handles repair or replacement.

How hard is the Goldfinger to install?

It is about as simple as trigger upgrades get. The Goldfinger is a self-contained, one-piece cassette, so you punch out your factory pins, drop the unit into the lower, and reinstall the pins with the included anti-walk pin set. Just avoid over-torquing the pinset screws when snugging everything down.

What makes the Goldfinger feel smoother than a mil-spec trigger?

CMC uses a proprietary machining process on the sear engagement surfaces that produces a much finer 1-2 RMS finish compared to the rougher surfaces left by typical EDM machining. That polish gives you a crisp single-stage pull with no grit and no creep before the hammer drops. The flat bow and positive reset round it out for consistent, repeatable shots.

Additional information

UPC

850040016017

Manufacturer

Manufacturer Part Number

91503GF

Color

TRIGGER/SINGLE STAGE

Length

7.7700

Model

Reviews

There are no reviews yet.

Be the first to review “CMC Triggers Goldfinger Flat Single-Stage AR-15 Trigger 3.5 lb”