Description
Christensen Arms built its name on high-end precision rifles, and the Evoke is their way of putting that pedigree into a rifle regular hunters can carry into the field without babying it. This version is chambered in .300 PRC, one of the best long-range big game cartridges going, and it wears a 22-inch 416R stainless steel barrel that is button rifled, hand lapped, and fully free floated. The metalwork gets a Burnt Bronze Cerakote finish while the synthetic stock comes in OD Green, a combo that looks sharp and shrugs off weather.
What Makes the Evoke 300 PRC Worth a Look
Every Evoke ships with Christensen's sub-MOA accuracy guarantee, and independent range testing has backed that up across multiple factory loads. The trigger is a genuine TriggerTech unit, externally adjustable from roughly 2.5 to 5 pounds, and it breaks clean with next to no creep. The bolt runs on a two-lug design with spiral fluting and an oversized handle, so cycling fast on a follow-up shot feels natural even with gloves on. Feeding comes from a detachable MDT polymer magazine holding 3 rounds of .300 PRC.
Set Up for Suppressors and Serious Glass
The muzzle is threaded 5/8×24 and comes wearing Christensen's RFR muzzle brake, which takes real bite out of .300 PRC recoil. Pull it off and you are ready to spin on a suppressor. The receiver is drilled and tapped on the familiar Remington 700 pattern with 8-40 screws, so scope base options are everywhere, and a short Picatinny rail section at the forend tip gives you a solid mounting point for a bipod or tripod adapter along with sling studs.
A Field Rifle That Earns Its Keep
The stock uses a hybrid grip angle, raised comb, and grippy texture panels that make it comfortable behind a magnum cartridge. Add the limited lifetime warranty and this is a rifle you can hunt elk, mule deer, and moose with for decades. Premium features, working-rifle attitude.
Key Specifications
- Manufacturer: Christensen Arms
- Model: Evoke
- Manufacturer Part Number: 801-15010-01
- UPC: 840290528941
- Caliber: .300 PRC
- Action: Bolt Action, Two-Lug Spiral Fluted Bolt
- Barrel Length: 22 inches
- Barrel: 416R Stainless Steel, Button Rifled, Hand Lapped, Free Floated
- Twist Rate: 1:8
- Muzzle: 5/8×24 Threaded with RFR Muzzle Brake
- Trigger: TriggerTech, Adjustable 2.5 to 5 lbs
- Capacity: 3-Round Detachable MDT Magazine
- Metal Finish: Burnt Bronze Cerakote
- Stock: OD Green Synthetic with Hybrid Grip Angle
- Optic Mounting: Drilled and Tapped, Rem 700 Pattern (8-40 Screws)
- Accuracy: Sub-MOA Guarantee, Limited Lifetime Warranty
What’s Included
- Christensen Arms Evoke rifle in .300 PRC
- One 3-round detachable MDT magazine
- RFR muzzle brake (factory installed)
- Owner's manual
Frequently Asked Questions
Does the Christensen Evoke 300 PRC come with a muzzle brake?
Yes, it ships with Christensen's RFR (Reduced Felt Recoil) brake already installed on the 5/8×24 threaded muzzle. It does a nice job taming .300 PRC recoil at the bench. If you run a suppressor, just remove the brake and thread your can straight on.
What scope bases fit the Evoke?
The receiver is drilled and tapped on the standard Remington 700 footprint using 8-40 screws, so you have a huge selection of bases and one-piece rails to choose from. No sights are included, so plan on adding glass before heading to the range.
Is the Evoke 300 PRC really sub-MOA out of the box?
Christensen backs every Evoke with a sub-MOA accuracy guarantee, and published range tests have shown these rifles grouping under an inch at 100 yards with multiple factory loads. Like any rifle, it will show a preference for certain ammo, so it pays to test a few premium hunting loads to find what yours likes best.
Can I adjust the trigger on this rifle?
Yes, the Evoke uses a genuine TriggerTech trigger that is externally adjustable from about 2.5 to 5 pounds. It comes from the factory set right around 3 to 3.5 pounds, which is a solid all-around hunting weight. The break is crisp with basically zero creep.




Reviews
There are no reviews yet.