Description
There aren't many rifles that make a .22-250 feel this easy to pack around. The Ridgeline FFT from Christensen Arms weighs in around 5.3 pounds, and that number comes from smart engineering rather than corner cutting. The 20 inch 416R stainless barrel is wrapped in aerograde carbon fiber, button rifled, hand lapped, and free floated, then finished off with a 1:14 twist that stabilizes the classic 50 to 55 grain varmint bullets this cartridge was born to launch. The metalwork wears Burnt Bronze Cerakote over a green stock with black and tan webbing, so it looks as good in the truck as it does on a fence line.
What Flash Forged Technology Does for the Ridgeline
FFT is Christensen's carbon fiber manufacturing process, and it's the reason this rifle sheds close to a full pound compared to the standard Ridgeline. The monocoque shell stock skips the heavy internal fill found in typical composite stocks while staying rigid where it counts, with carbon bedding pillars and spot bedding for a consistent foundation. The hinged floor plate and bolt knob are FFT carbon as well. Feeding comes from a 4+1 internal magazine, and the spiral fluted bolt runs on a Remington 700 footprint action, so scope bases and rings are easy to come by. The receiver comes drilled and tapped with no sights, ready for the glass of your choice.
A .22-250 Built to Reach Out
Christensen backs this rifle with a sub-MOA accuracy guarantee, and the TriggerTech trigger breaks clean to help you hold up your end of the deal. The muzzle is threaded 1/2-28 and ships with a removable stainless side-baffle brake, so you can run the brake, spin it off for a bare muzzle, or add a suppressor for quiet mornings on a calling stand. For a dedicated coyote and predator rig that won't wear you out on long walks between sets, this one is tough to top.
Key Specifications
- Manufacturer Part Number: 801-06186-00
- UPC: 696528091516
- Caliber: .22-250 Remington
- Action: Bolt Action, Remington 700 footprint
- Barrel Length: 20 in
- Barrel: Carbon fiber wrapped 416R stainless steel, free floated
- Twist Rate: 1:14
- Muzzle Thread: 1/2×28 with removable side-baffle brake
- Capacity: 4+1 internal magazine with hinged floor plate
- Trigger: TriggerTech single-stage
- Stock: FFT carbon fiber sporter, green with black/tan accents
- Finish: Burnt Bronze Cerakote
- Safety: Two-position
- Sights: None, drilled and tapped for Remington 700 bases
- Weight: Approx. 5.3 lbs
What’s Included
- Christensen Arms Ridgeline FFT rifle
- Removable stainless steel side-baffle muzzle brake (installed)
- Owner's manual
Frequently Asked Questions
Is the Ridgeline FFT really a sub-MOA rifle out of the box?
Christensen Arms backs every Ridgeline FFT with a sub-MOA accuracy guarantee. The free-floated, hand-lapped carbon fiber wrapped barrel and the TriggerTech trigger do a lot of the heavy lifting there. Feed it quality ammo it likes and this rifle will reward you with tight groups.
Can I run a suppressor on the Ridgeline FFT 22-250?
Yes. The muzzle is threaded 1/2×28 on the 22-250 model, and the side-baffle brake spins off so you can mount a suppressor or shoot with a bare muzzle. Just note the thread pattern differs from the 5/8×24 used on most other Ridgeline FFT calibers, so match your suppressor mount accordingly.
What scope mounts fit the Christensen Arms Ridgeline FFT?
The action is built on the Remington 700 footprint and the receiver comes drilled and tapped for Remington 700 style bases. That means you have a huge selection of rings, bases, and one-piece rails to choose from. No iron sights are included, so plan on adding an optic.
Will the 1:14 twist barrel stabilize heavier bullets?
The 1:14 twist is the traditional 22-250 rate and it is ideal for bullets in the 40 to 55 grain range, which covers most varmint and predator loads. Heavier high-BC bullets in the 69 grain and up range generally need a faster twist and will not stabilize reliably. For coyotes and prairie dogs with standard weights, this barrel is right at home.




Reviews
There are no reviews yet.