Description
The Carlson's Cremator Ported Choke Tube in 12 gauge .715 is built for the folks who want to stretch their range on ducks and geese when the birds hang up out past the decoys. That .715 constriction puts it in the long range category, and it's the tube you reach for when you need consistent, hard-hitting patterns beyond 40 yards. It threads into Browning Invector Plus barrels, so it drops right into a lot of the most popular waterfowl guns out there.
What Makes the Cremator Long Range Tube Pattern So Tight
The heart of this tube is Carlson's Triple Shot Technology, or TST. It's a set of three graduated rings in the taper that ease the shot column from your bore down to the final constriction in a more gradual, stair-step fashion. The payoff is real out in the blind: less pellet deformation, fewer flyers, and denser patterns that hold together downrange. Add the 25% longer parallel section you get from an extended tube and you've got a setup that helps the shot column settle before it leaves the muzzle.
Porting That Keeps You On Target
The ported design on this Cremator does more than look sharp sticking out of your barrel. Those ports vent gas to knock down muzzle jump and take some of the sting out of felt recoil, which matters when you're swinging on a second or third bird. The tube also extends past the muzzle, which helps protect your barrel threads during heavy steel shot use.
Built to Take a Beating Season After Season
This one is machined from heat-treated 17-4 stainless steel and finished in matte black, so it shrugs off the wet, muddy abuse that comes with waterfowl season. It installs and comes out without a wrench, which is handy with cold fingers, and Carlson's makes it right here in the USA and backs it with a lifetime warranty. It handles lead, steel, and Hevi-Shot loads, so you've got flexibility no matter what's in your shell box.
Key Specifications
- Manufacturer: Carlson's Choke Tubes
- Manufacturer Part Number: 11527
- UPC: 723189115272
- Gauge: 12 Gauge
- Constriction Type: Long Range
- Constriction Diameter: .715
- Thread Pattern: Browning Invector Plus
- Style: Invector Plus
- Porting: Ported
- Design: Extended, 25% longer parallel section
- Material: Heat-treated 17-4 Stainless Steel
- Finish: Matte Black
- Technology: Triple Shot Technology (TST)
- Shot Compatibility: Lead, Steel, and Hevi-Shot
- Length: 7.7 in
- Warranty: Lifetime, Made in USA
What’s Included
- One Carlson's Cremator Ported Long Range .715 choke tube (12 Gauge, Invector Plus)
Frequently Asked Questions
What range is the Cremator .715 long range tube best for?
This is Carlson's long range constriction, designed to hold tight, dense patterns out past 40 yards. It's the go-to choice for ducks and geese that hang up beyond decoy range. If you're taking closer shots inside 40 yards, a mid range tube would open your patterns up a bit more.
Will this choke fit my shotgun?
It's cut for the Browning Invector Plus thread pattern, which is used on many Browning and Winchester Invector Plus barrels in 12 gauge. Always confirm your barrel is marked Invector Plus before ordering, since standard Invector is a different thread. When in doubt, check the markings on your existing choke tube.
Can I run steel shot through the Cremator long range choke?
Yes, this tube is rated for lead, steel, and Hevi-Shot loads. That said, the long range Cremator should not be used with steel shot larger than #2. The extended body also sticks out past the muzzle, which helps protect your barrel during heavy steel use.
Do I need a wrench to install the Cremator ported tube?
No wrench is required. The extended design lets you thread it in and back it out by hand, which is a real convenience when you're dealing with cold, wet fingers in the blind. A standard choke wrench will still work if you prefer to snug it down.





Reviews
There are no reviews yet.