Description
The CDX-MC Kraken is what happens when Cadex decides one rifle should do the work of several. At its core is a patented barrel-change system that uses traditional barrel-to-action threading paired with a torque tool that works from the breech side, so you can pull a barrel and reinstall it with barely any shift in point of impact. A single captive screw frees the detachable base for swapping between short and long action setups, which means this 6.5 Creedmoor can later run anything from 6mm Creedmoor up to .338 Lapua Magnum with the right conversion parts.
Barrel and Trigger on the CDX-MC Kraken
Cadex doesn't cut corners where it counts. The 24 inch barrel is a single point cut Bartlein blank with 5R rifling, finished in a heavy 1.3 inch straight taper with fluting and a 1:8 twist that stabilizes the long, high-BC bullets 6.5 Creedmoor is known for. The muzzle is threaded 5/8-24 and ships with the MX1 brake installed, so recoil is more of a suggestion than an event. Behind it sits the DX2 Evo trigger, which the user can convert between single and two stage and adjust from roughly 1.5 to 2.5 pounds. The three-lug bolt runs a 60 degree throw for quick cycling and generous scope clearance.
A Chassis Built Around the Kraken
The proprietary chassis blends the best parts of Cadex's Dual Strike and Light Strike designs, machined from 6061-T6 aluminum with a non-reflective finish in a sharp hybrid tan and black scheme. The folding buttstock adjusts for length of pull, cheek height, and recoil pad position without a single tool, and the oversized trigger guard and mag release work fine with gloves on. A 20 MOA rail up top gets you extra elevation for stretching distance, and it feeds from AICS-pattern magazines with a 10-round mag included.
Why the Kraken Earns Its Spot
This is a rifle for people who take long-range work seriously, whether that's ELR matches, precision competition, or just owning one action that can wear many barrels. It's a big investment, and it shoots like one.
Key Specifications
- Manufacturer: Cadex Defence
- Model: CDX-MC Kraken
- MPN: CDXMCKRKN6524BR20I2B1N
- UPC: 842940108558
- Caliber: 6.5mm Creedmoor
- Action: Bolt Action, 3-Lug, 60 Degree Throw
- Barrel Length: 24"
- Barrel: Bartlein Match Grade, Single Point Cut 5R Rifling, Fluted
- Twist Rate: 1:8
- Muzzle Thread: 5/8"-24 TPI
- Muzzle Device: Cadex MX1 Muzzle Brake
- Trigger: Cadex DX2 Evo, Adjustable 1.5-2.5 lbs
- Capacity: 10+1, AICS-Pattern Magazine
- Top Rail: 20 MOA Picatinny
- Stock: Folding, Tool-less Adjustable LOP and Cheek Piece
- Finish: Hybrid Tan/Black
What’s Included
- Cadex CDX-MC Kraken rifle
- One 10-round AICS-pattern magazine
- MX1 muzzle brake (installed)
Frequently Asked Questions
Can the CDX-MC Kraken really switch to other calibers?
Yes, that's the whole point of the platform. The Kraken uses a threaded barrel system with a breech-side torque tool, and a single screw releases the detachable base for converting between short and long action cartridges. With the appropriate barrel, bolt, and magazine conversion parts from Cadex, one rifle can run everything from 6mm Creedmoor up to .338 Lapua Magnum. The barrel-change tool kit and additional barrels are sold separately.
Does swapping barrels on the Kraken ruin my zero?
Cadex built the Kraken specifically to solve that problem, and it claims the lowest point of impact shift of any multi-caliber system out there, roughly a tenth of a mil between removal and reinstallation of the same barrel. As long as you torque the barrel properly with the Kraken tooling, you should be back on target with minimal correction. That repeatability is what separates it from most switch-barrel rifles.
What magazines does the Cadex Kraken use?
It feeds from AICS-pattern magazines, which are about as common as it gets in the precision rifle world. This 6.5 Creedmoor configuration ships with a 10-round mag, and short action AICS mags from major makers will run in it. If you convert to a long action magnum later, you'll swap in the appropriate magazine sleeve as part of the conversion.
Is the DX2 Evo trigger adjustable?
It is, and it's one of the more flexible factory triggers around. The DX2 Evo can be converted by the user between single stage and two stage operation, and pull weight adjusts from about 1.5 to 2.5 pounds. The detachable base on the chassis gives you easy access for making those adjustments without pulling the whole action.




Reviews
There are no reviews yet.