Description
The Burris XTR Signature rings are one of the smartest mounting solutions out there for anyone running a 30mm optic on a precision or tactical rig. Instead of just clamping a scope down and hoping everything lines up, these use Burris Pos-Align inserts that let you dial in alignment and build in elevation cant without touching the internal adjustments of your scope. That means you keep your reticle closer to optical center and hang onto more of your usable adjustment range, which matters a lot when you're stretching things out past a few hundred yards.
What Makes the XTR Signature Rings Different
The secret is the insert system. Each set ships with a selection of polymer Pos-Align inserts: one set of 0 MOA concentric, one set each of plus/minus 5 and plus/minus 10 MOA, and two sets of plus/minus 20 MOA. Mix and match those and you can build in a surprising amount of cant, which means you can skip the expensive tapered base or shimming routine and still reach way out there. The inserts also cushion the scope tube, so you get maximum ring-to-scope contact without chewing up the finish on your optic.
Build and Fit on the 30mm 1.50" X-High Rings
These are CNC-machined from aluminum to keep weight down while still delivering serious holding power. The self-centering dual steel clamps with full cross-through connection grab onto any width Picatinny rail and automatically center the ring, so you get a repeatable, rock-solid mount every time. At 1.50 inches measured to the center of the ring, this X-high height gives you the clearance you need for larger objective bells and bulkier tactical scopes, and it's a popular pairing with modern chassis rifles where you want a comfortable, heads-up cheek weld.
Dialing Them In
Mounting is straightforward if you take your time and read through the insert combinations. Burris spec calls for 20 inch-pounds on the top caps and 45 inch-pounds on the cross bolts, so a good torque wrench is your friend here. Get the inserts sorted, torque to spec, and these things just stay put.
Key Specifications
- Manufacturer: Burris
- Manufacturer Part Number: 420223
- Model Number: 420223
- UPC: 000381202239
- Tube Size: 30mm
- Height to Center: 1.50 in (X-High)
- Finish: Matte Black
- Material: CNC-Machined Aluminum
- Mount Type: Picatinny / Weaver Style
- Insert System: Pos-Align
- Top Ring Torque: 20 inch-lbs
- Cross Bolt Torque: 45 inch-lbs
- Sold As: Pair
- Style: Tactical Rings
What’s Included
- Pair of Burris XTR Signature 30mm rings (1.50" height)
- One set of 0 MOA concentric Pos-Align inserts
- One set of +/- 5 MOA Pos-Align inserts
- One set of +/- 10 MOA Pos-Align inserts
- Two sets of +/- 20 MOA Pos-Align inserts
- Mounting hardware
- Instructions
Frequently Asked Questions
What do the Pos-Align inserts on the XTR Signature rings actually do?
The Pos-Align inserts let you align and virtually sight in your scope without touching the internal turret adjustments. By swapping in the different MOA inserts, you can correct for off-center receiver holes or bases and build in elevation cant for long-range shooting. This keeps your reticle closer to optical center and gives you more usable adjustment range inside the scope.
Will the 1.50" height give me enough clearance for a large objective scope?
The 1.50-inch height is the X-high option in the lineup, measured from the ring and base interface to the ring centerline. That extra height is well suited for scopes with larger objective bells and bulkier tactical builds. It's also a common choice on chassis rifles where you want a comfortable, heads-up cheek weld.
What rails do these Burris XTR Signature rings fit?
These rings are designed for Picatinny-style rails and will work on most Weaver-style rails as well. The self-centering dual steel clamps automatically center the ring on any width Picatinny rail for a repeatable mount. They are built for a 30mm scope tube.
What torque specs should I use when mounting these rings?
Burris lists 20 inch-pounds on the top ring caps and 45 inch-pounds on the cross bolts. A quality torque wrench makes the install easy and keeps everything holding zero. Take your time sorting out which inserts you need before you torque everything down.




Reviews
There are no reviews yet.