Description
If you own a Tikka T3 or T3x and want a clean, no-guesswork way to mount a 1-inch scope, these Burris rings take all the figuring out of it. Instead of stacking a base and a set of rings, they clamp directly to the rifle's integrated dovetail, so you get a lower, more rigid setup with fewer parts in the stack. They come as a matched pair in a matte black finish that blends right in with the T3x's look.
What Makes These Tikka T3x Rings a Clean Fit
Burris machined these specifically for the Tikka dovetail, which means no shimming, no adapters, and no wondering whether they'll sit square. The rings are cut for 1-inch scope tubes and ride at a medium height, which is the sweet spot for most standard hunting scopes with objectives in the 40mm to 44mm range. You get good clearance over the barrel without jacking the scope up so high that your cheek loses contact with the stock.
Steel Build That Holds Zero
These are solid steel, not aluminum, and that matters when a rifle like the T3x starts barking under a magnum load. Steel resists flex and keeps your optic locked where you left it, shot after shot. Burris lists a 20 inch-pound spec for the top ring screws and 60 inch-pounds for the cross bolts, so grab a torque wrench and you'll have everything snugged down to the right numbers without guessing.
Built for Real Hunting and Range Use
Whether you're chasing whitetails in the timber, glassing mule deer across a canyon, or just dialing in groups at the bench, a mount that doesn't shift is half the battle. This Burris Tikka T3x ring mount set gives you that solid foundation, and the matte finish keeps glare down when the sun's working against you. It's the kind of simple, dependable hardware that you bolt on once and forget about.
Key Specifications
- Manufacturer: Burris
- MPN: 420135
- UPC: 000381201355
- Tube Diameter: 1 inch
- Ring Height: Medium
- Material: Solid Steel
- Finish: Matte Black
- Fits: Tikka T3 and T3x (integrated dovetail)
- Ring Quantity: Pair
- Top Ring Torque: 20 inch-lbs
- Ring Cross Bolt Torque: 60 inch-lbs
- Mount Type: Direct dovetail ring mount
What’s Included
- Pair of Burris Tikka T3 1" medium ring mounts
- Mounting hardware
Frequently Asked Questions
Will these Burris rings fit my Tikka T3x?
Yes. These are designed to clamp directly onto the integrated dovetail found on both the Tikka T3 and T3x rifles. You won't need a separate base or any adapters to get them on.
What size scope tube do these rings hold?
These are built for 1-inch scope tubes. If your scope has a 30mm tube, you'll want the 30mm version of these Burris Tikka T3 mounts instead.
Is medium height the right choice for my scope?
Medium height works well for most standard hunting scopes with objective lenses up to around 44mm, giving you clearance over the barrel while keeping a comfortable cheek weld. Larger objectives in the 50mm range may need more clearance, so check your scope's dimensions before ordering.
What torque should I use when installing these rings?
Burris specs the top ring screws at 20 inch-pounds and the cross bolts at 60 inch-pounds. Using a torque wrench set to those numbers keeps your scope secure without over-tightening and risking tube damage.




Reviews
There are no reviews yet.