Description
This is the mount that bridges your Burris FastFire red dot to the flat top of a rifle, carbine, or just about anything wearing a Picatinny or Weaver rail. Burris machines it from aluminum and finishes it in matte black, so it sits low, keeps the dot right where you want it, and doesn't throw off glare. It's a one-piece base that clamps directly to the rail using a cross screw and clamp nut, and the design works with any generation of the FastFire series.
What the FastFire Picatinny/Weaver Mount Fits
The short version: if your firearm has a standard Weaver-style or Picatinny-style base, this mount belongs on it. It's a universal, non-firearm-specific base, which is why it shows up on everything from AR flat tops and bolt guns to shotguns with rail ribs. It's commonly paired with the FastFire II and FastFire 3, and it will cradle any generation FastFire footprint. Just note this is a base only, so you'll still need the actual FastFire sight to complete the setup.
Getting the FastFire Mount Dialed In
Installation is about as simple as red dot mounting gets. You loosen the clamp nut on the right side, drop the mount onto your rail in the slot you want, keep a little forward pressure toward the muzzle, and snug the clamp nut down to roughly 20 inch-pounds. From there the FastFire itself attaches to the top of the base with the included Torx screws. Burris designed this base to sit the sight very low and shrug off recoil, which is a big part of why the FastFire holds zero on hard-kicking platforms.
Why the Matte Black Finish and Aluminum Build Matter
Aluminum keeps the whole thing light, and the matte black finish stays low-key in the field. It's a no-frills piece of kit built to do one job well, and it's backed by the Burris Forever Warranty, so you're covered for the long haul.
Key Specifications
- Manufacturer: Burris
- Manufacturer Part Number: 410335
- UPC: 000381103352
- Mount Type: Picatinny/Weaver
- Pieces: 1-Piece
- Compatibility: All generation Burris FastFire series red dot sights
- Material: Aluminum
- Finish: Matte Black
- Color: Black
- Mounting Hardware: Included
- Warranty: Burris Forever Warranty
- Shipping Weight: 0.1 lb
What’s Included
- Burris FastFire Picatinny/Weaver mount base
- Mounting hardware
Frequently Asked Questions
Which FastFire sights does the 410335 mount work with?
This base is built to accept any generation of the Burris FastFire series red dot, including the FastFire II and FastFire 3. It's a universal rail base rather than a firearm-specific plate. Keep in mind it does not include the sight itself, just the mount that attaches it to your rail.
What kind of rail does the Burris FastFire mount attach to?
It clamps onto standard Picatinny-style and Weaver-style bases, so it fits the overwhelming majority of flat-top rifles, carbines, and shotguns with a rail. You loosen the clamp nut, seat the mount in your chosen slot, and tighten it back down. It's a straightforward setup that doesn't require anything beyond the included hardware.
How do I install the FastFire Picatinny/Weaver mount?
Loosen the clamp nut on the right side, place the mount on the rail with the cross screw in the slot you want, and keep light forward pressure toward the muzzle as you tighten the clamp nut to about 20 inch-pounds. Then attach the FastFire sight to the top of the mount using the Torx screws that come with the sight. It takes just a few minutes and no specialty tools.
Is this a low-profile mount?
Yes, Burris designed this base to sit the FastFire very low on the rail while standing up to recoil. The low height helps the dot co-witness or sit close to the bore depending on your platform. The aluminum construction also keeps it light so it doesn't add noticeable weight to your setup.




Reviews
There are no reviews yet.