$799.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
BSF built this pre-fit around a proven idea done a little differently. Under the carbon fiber sits a precision-turned 416R stainless steel match barrel, and instead of wrapping the fiber tight to the steel with epoxy, BSF slides on a roll-wrapped carbon sleeve loaded under tension. The result is a big air gap between the carbon and the steel that lets air circulate and pull heat away fast, which helps the barrel cool between strings and hold its point of impact as things warm up. The carbon is engineered to expand at the same rate as the 416R core, so you get the stiffness and light weight of carbon without the delamination worries that come with older wrapping methods.
This one is chambered in 6.5 PRC with a 22-inch length and a 1-8 twist, which is the right pitch for stabilizing the long, heavy 140 to 156 grain bullets that make the cartridge shine. The 6.5 PRC runs roughly 200 to 250 fps faster than a 6.5 Creedmoor with the same bullet, so you get a flatter trajectory, more retained energy, and less wind drift while keeping recoil manageable. It's a favorite for long-range target work and clean shots on deer and antelope out past what most people ever shoot in the field, with plenty in the tank for elk inside sensible distances.
Because it's a pre-fit, the heavy machining is already done. The muzzle comes threaded 5/8-24 so you can run a brake or suppressor, and BSF calls for torquing to a maximum of 70 ft-lbs. Depending on whether your setup uses a shouldered fit or a barrel nut, you'll want the right barrel vise or action wrench, a set of go and no-go headspace gauges, and a little anti-seize on the threads. If you're new to swapping barrels, a gunsmith can headspace it in short order, and from there you've got a purpose-built precision barrel ready for load development.
If you're chasing a lighter build without giving up the rigidity and heat management of a bull-contour barrel, this is a smart way to get there.
This barrel has a 1-8 twist, which is the standard pitch for 6.5 PRC and does a great job stabilizing the long, high-BC bullets in the 140 to 156 grain range. That twist lets those heavier match and hunting bullets fly true out to long distance. It's the setup most 6.5 PRC shooters run for both target work and hunting.
BSF starts with a 416R stainless match barrel and slips a roll-wrapped carbon sleeve over it under tension, leaving a large air gap between the two. That gap lets air flow through and pull heat away faster than a solid steel barrel of the same weight. You end up with the stiffness of a bull barrel at a fraction of the weight, plus quicker cooling between strings.
It's a pre-fit, so the chambering and threading are already done, which takes most of the hard machining off your plate. You'll still need to set headspace with go and no-go gauges and torque it to spec, with BSF calling for a max of 70 ft-lbs. If you have the tools and experience it's a doable home project, otherwise a gunsmith can knock it out quickly.
The 6.5 PRC is a flat-shooting, hard-hitting cartridge that's excellent on deer and antelope well past typical field ranges. It carries enough energy for elk inside reasonable distances when you pick the right bullet and place your shot. It's also a strong choice for long-range target and PRS-style shooting thanks to its low wind drift.
| UPC | 615678781603 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SF3IYT0752 |
You must be logged in to post a review.
Reviews
There are no reviews yet.