$799.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
BSF Barrels built their reputation on one clever idea: instead of wrapping carbon fiber tight against a steel liner like everyone else, they suspend a roll-wrapped carbon fiber sleeve under tension so it only touches the barrel at a few key points. This SF3IYT0077 is their 22-inch AR-10 in 6.5 Creedmoor with a 1:8 twist, and it's a great fit for anyone chasing long-range performance without hanging a heavy chunk of steel off the front of their rifle.
The core is a precision-turned, match-grade 416R stainless steel barrel. Over that, BSF fits a perforated carbon fiber jacket loaded under tension, leaving roughly a 95 percent air gap between the carbon and the steel. That gap lets air circulate around the liner so heat sheds quickly, and the vented oval slots in the sleeve help move that heat out even faster. The upside for you is a barrel that behaves like a stiff target profile but weighs a whole lot less, which changes how the whole rifle balances and swings.
The 1:8 twist is right in the sweet spot for 6.5 Creedmoor, stabilizing the heavier high-BC match bullets that make this cartridge such a strong long-range performer. At 22 inches you're getting close to the full velocity potential of the round, which pays off downrange with flatter trajectories and less wind drift. It's a smart pairing whether you're punching paper at distance, ringing steel, or setting up a lightweight hunting build.
This is a barrel only, meant for AR-10 platform builds, and BSF's larger-caliber barrels run their "Rifle+2" gas system, so plan your gas block and tube accordingly. It's a drop-in project for anyone comfortable assembling an AR-10 upper. Everything is made in the USA at BSF's own facility, and the barrel is backed by their limited warranty against defects.
It comes with a 1:8 twist, which is the standard sweet spot for 6.5 Creedmoor. That rate does a great job stabilizing the heavier high-BC match bullets most 6.5 shooters run for long range, roughly in the 140-grain neighborhood. You'll get reliable stabilization across the common factory match and hunting loads.
This is a barrel only, built for AR-10 platform builds. You'll supply the rest of your upper components including the gas block, gas tube, handguard, and bolt carrier group. It's a straightforward install for anyone comfortable assembling an AR-10 upper.
BSF starts with a 416R stainless match barrel, then fits a tensioned carbon fiber sleeve that only contacts the steel at a few points, leaving about a 95 percent air gap. That gap plus the vented slots in the jacket let heat shed faster than a wrapped design. The big payoff is a much lighter barrel that stays stiff, so your rifle balances better without giving up rigidity.
BSF's larger-caliber barrels, including the 6.5 Creedmoor, run their Rifle+2 gas system, which sits a couple inches longer than a standard rifle-length setup. Make sure you match your gas block and gas tube to that spec when you build. Getting the gas length right keeps the rifle running smoothly and softens the recoil impulse.
| UPC | 615678757837 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SF3IYT0077 |
You must be logged in to post a review.
Reviews
There are no reviews yet.