Description
Some rifles are built for the truck, and some are built for the last two miles of a climb where every ounce matters. The Browning X-Bolt 2 Mountain Pro SPR falls firmly in the second camp. At 6.4 pounds with a 40 inch overall length, this 7mm PRC carries like a lightweight but shoots like the flagship it is. Browning trimmed weight everywhere it made sense: a machined stainless Pro receiver, spiral-fluted bolt, aluminum bolt handle, and a spiral-fluted sporter barrel that also sheds heat faster for consistent groups.
Why the SPR Barrel Makes Sense in 7mm PRC
The SPR treatment shortens the barrel four inches from standard, landing this one at 20 inches with a 5/8×24 threaded muzzle. Hang a suppressor on it and you still have a rifle that handles well in timber and tight spots instead of feeling like a pole vault. The Recoil Hawg muzzle brake and thread protector come in the box, so it tames the 7mm PRC right out of the gate if you run it unsuppressed. Barrels are button rifled with a 1:8 twist that stabilizes the heavy, high-BC bullets this cartridge was designed around, and the action is bedded with a free-floated barrel for repeatable accuracy.
A Carbon Fiber Stock That Fits You
The one-piece wrapped carbon fiber stock is stiff, light, and resists flex on offhand shots. The height-adjustable comb moves over a full inch in fine increments, which matters when you mount a big objective scope and still want proper eye alignment. Length of pull adjusts with spacers, and the bedding block is compressed carbon fiber, keeping stability up without adding weight. The whole barreled action, bolt, bottom metal, and brake wear Tungsten Cerakote to shrug off weather.
Trigger and Controls on the X-Bolt 2 Mountain Pro
Browning's DLX trigger is a three-lever design with no creep, no take-up, and no overtravel, set at 3.5 pounds from the factory and adjustable down to 3. Add the fast 60 degree bolt lift, tang safety, detachable 3-round rotary magazine, and X-Lock scope mounting compatibility, and you have a complete backcountry setup that just needs glass and ammo.
Key Specifications
- Manufacturer: Browning
- Model: X-Bolt 2 Mountain Pro SPR Tungsten
- MPN: 036082298
- UPC: 023614865551
- Caliber: 7mm PRC
- Action: Bolt Action (Long Action)
- Barrel Length: 20 in, spiral fluted sporter contour
- Twist Rate: 1:8 in
- Muzzle Thread: 5/8×24
- Capacity: 3+1, detachable rotary magazine
- Trigger: DLX, 3.5 lb factory set, adjustable to 3.0 lb
- Stock: Carbon fiber with adjustable comb and LOP
- Finish: Tungsten Cerakote
- Overall Length: 40 in
- Weight: 6.4 lbs
- Safety: Tang mounted
- Sights: None, drilled and tapped for optics
What’s Included
- Browning X-Bolt 2 Mountain Pro SPR rifle
- One 3-round rotary magazine
- Recoil Hawg muzzle brake
- Thread protector cap
- Comb and length-of-pull adjustment spacers
- Owner's manual
Frequently Asked Questions
Is the Browning X-Bolt 2 Mountain Pro SPR ready for a suppressor?
Yes, that is the whole point of the SPR designation. The 20 inch barrel runs four inches shorter than the standard Mountain Pro so the rifle stays manageable with a can attached, and the muzzle is threaded 5/8×24. A Recoil Hawg brake and thread protector are included, so you are covered whether you run it suppressed or not.
Will a 20 inch barrel hurt performance with 7mm PRC?
You give up some velocity compared to a 24 inch tube, typically in the ballpark of 25 to 35 fps per inch. The 7mm PRC has enough case capacity that it remains a legitimate big-game cartridge well past normal hunting distances from a 20 inch barrel. The 1:8 twist still stabilizes the heavy, high-BC bullets the cartridge is known for.
How adjustable is the stock on the X-Bolt 2 Mountain Pro SPR?
The carbon fiber stock has a height-adjustable comb that moves over a full inch in fine increments using included spacers, which helps you get proper eye alignment behind larger scopes. Length of pull is also adjustable with spacers. It is a genuine custom-fit setup without needing a gunsmith.
Does this rifle come with sights or a scope mount?
No sights are included. The receiver is drilled and tapped and works with Browning's X-Lock scope mounting system, which uses four screws per base for a very secure hold. Plan on adding rings or a rail and quality glass, since this rifle deserves a scope that matches its reach.



Reviews
There are no reviews yet.