Description
There is something about walnut and blued steel that never goes out of style, and Browning leaned into that with the X-Bolt 2 Hunter. This one is chambered in 6.8 Western, the short magnum cartridge Browning and Winchester built around heavy, high BC .277 caliber bullets. The 24-inch sporter contour barrel wears a 1:7.5 twist to stabilize those long 165 to 175 grain projectiles, which means real elk and mule deer performance at distances where a lot of classic cartridges start running out of steam. The barrel is free floated and the action is bedded at the recoil lug and action screws, so accuracy stays consistent whether it is bone dry or soggy in the timber.
What Changed on the X-Bolt 2
The original X-Bolt earned a loyal following, and the second generation keeps what worked while cleaning up the rest. The receiver picked up additional bolt guidance surface, so cycling feels noticeably smoother with less bind when you run it fast from the shoulder. The bolt itself was reworked with a new ergonomic knob, and the familiar 60 degree lift stays short enough to clear big scope objectives. The new DLX trigger is the highlight for a lot of folks. It is a three lever design with zero creep and zero overtravel, preset at 3.5 pounds and adjustable down to 3. Out of the box it breaks like a trigger you would expect on a rifle costing quite a bit more.
A Hunter Built to Carry
At 6 pounds 8 ounces bare, this rifle will not wear you down on a long ridge hike, and the checkered satin walnut stock gives you a solid grip in gloves or wet weather. The Inflex recoil pad takes the sting out of the 6.8 Western, the top tang safety with bolt unlock button sits right under your thumb, and the detachable rotary magazine feeds smoothly and drops free without fuss. The receiver comes drilled and tapped, so pick out a good piece of glass and this one is ready for opening day.
Key Specifications
- Manufacturer Part Number: 036001299
- UPC: 023614854616
- Caliber: 6.8 Western
- Action: Bolt Action, 60 Degree Bolt Lift
- Barrel Length: 24"
- Barrel Contour: Sporter
- Twist Rate: 1:7.5"
- Capacity: 3+1, Detachable Rotary Magazine
- Stock: Checkered Walnut, Satin Finish
- Barrel/Receiver Finish: Matte Blued
- Trigger: Adjustable DLX, 3.5 lb Factory Setting
- Overall Length: 44"
- Length of Pull: 13-5/8"
- Weight: 6 lbs 8 oz
- Sights: None, Drilled and Tapped for Optics
- Recoil Pad: Inflex, 1-1/4"
What’s Included
- Browning X-Bolt 2 Hunter rifle
- One 3-round detachable rotary magazine
- Owner's manual
- Cable lock
Frequently Asked Questions
Does the Browning X-Bolt 2 Hunter come with sights or a scope?
No, it ships without sights, which is standard for a rifle in this class. The receiver comes drilled and tapped from the factory, and Browning's X-Lock mounting system uses four screws per base for a rock solid optic setup. Plan on adding a quality scope before heading to the range.
What is the 6.8 Western good for?
The 6.8 Western was developed by Browning and Winchester to push heavy 165 to 175 grain .277 caliber bullets with high ballistic coefficients. That makes it a strong pick for elk, mule deer, and other big game at extended distances, with less recoil than most .30 caliber magnums. The 24-inch barrel and 1:7.5 twist on this rifle are matched perfectly to the cartridge.
Is the trigger on the X-Bolt 2 Hunter adjustable?
Yes. The new DLX trigger is a three lever design that comes set at 3.5 pounds from the factory and adjusts down to 3 pounds. It breaks clean with no creep or overtravel, and it is one of the biggest upgrades over the original X-Bolt.
What is different between the X-Bolt 2 and the original X-Bolt?
The second generation gets a reconfigured receiver with more bolt guidance surface for smoother cycling, a redesigned bolt with a new ergonomic handle, the adjustable DLX trigger, thinner bottom metal, and a thicker 1-1/4 inch Inflex recoil pad. The proven three lug bolt with its short 60 degree throw and the top tang safety carry over from the original.




Reviews
There are no reviews yet.