Description
Browning took everything people liked about the original X-Bolt and refined it for the second generation, and this Hunter Composite Stainless version might be the most weather-ready of the bunch. The matte stainless receiver and 24-inch stainless sporter contour barrel shrug off rain, snow, and sweaty pack straps, which matters a lot when your hunt runs longer than the forecast said it would. Chambered in 6.8 Western with a 1:7.5 twist, this rifle is set up to run the long, heavy .277 caliber bullets that cartridge was designed around, pushing 165 to 175 grain loads with real authority out past where most hunting shots ever happen.
A Stock That Fits You, Not the Other Way Around
The black Vari-Tech synthetic stock is one of the smartest features on the X-Bolt 2. You can adjust comb height for proper eye alignment behind your scope, tweak length of pull to match your build and your layers, and even swap grip modules between a traditional sporter angle and a more vertical grip. Overmolded gray grip panels keep things secure when your gloves are wet, and the 1.25-inch Inflex recoil pad takes real bite out of the 6.8 Western's push.
X-Bolt 2 Hunter Performance Where It Counts
The redesigned receiver adds extra bolt guidance surface, so the spiral-fluted bolt cycles smoothly without binding, and the short 60 degree lift clears big scope bells and keeps follow-up shots quick. The DLX trigger is a three-lever design with no creep or overtravel, preset at 3.5 pounds and adjustable down to 3. The action is bedded and the barrel free floats for consistent groups, and the muzzle comes threaded M13x0.75 with a radial brake installed and a thread protector included.
Ready for Glass and the Backcountry
There are no iron sights on this rifle because it's meant to wear an optic. The receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base for a rock-solid hold. Add your scope, feed it quality 6.8 Western ammo, and this thing is a legitimate elk and mule deer rig for open country.
Key Specifications
- Manufacturer Part Number: 036008299
- UPC: 023614859864
- Caliber: 6.8 Western
- Action: Bolt Action, Short Action
- Barrel Length: 24 in, Sporter Contour
- Barrel Finish: Matte Stainless
- Twist Rate: 1:7.5
- Muzzle Threading: M13x0.75, Radial Brake Included
- Capacity: 3+1, Detachable Rotary Magazine
- Stock: Black Vari-Tech Synthetic, Adjustable Comb and LOP
- Trigger: DLX, 3.5 lb Factory Set, Adjustable to 3 lb
- Overall Length: 44 in
- Safety: Top-Tang with Bolt Unlock Button
- Sights: None, Drilled and Tapped for X-Lock Scope Mounts
- Recoil Pad: Inflex, 1.25 in
What’s Included
- Browning X-Bolt 2 Hunter Composite Stainless rifle
- One 3-round detachable rotary magazine
- Radial muzzle brake (factory installed)
- Thread protector cap
- Owner's manual
Frequently Asked Questions
Does the Browning X-Bolt 2 Hunter come with a scope or iron sights?
No, this rifle ships without sights or optics. The receiver is drilled and tapped for Browning's X-Lock scope mounting system, which uses four screws per base for a very secure hold. Plan on picking up bases, rings, and a quality scope to complete the setup.
Can I put a suppressor on the X-Bolt 2 Hunter Composite Stainless?
The muzzle is threaded M13x0.75, which is a metric pitch rather than the more common 5/8×24. Some suppressors and adapters are available in that thread, but many will need an adapter, so check your can's specs first. The rifle ships with a radial brake installed and a thread protector so you're covered either way out of the box.
What is 6.8 Western good for and how far will it reach?
The 6.8 Western fires long, heavy .277 caliber bullets in the 165 to 175 grain range at around 2,900 fps, and the 1:7.5 twist barrel on this rifle stabilizes them properly. It hits harder downrange than a .270 Win while recoiling less than most magnums. It's a genuinely capable choice for elk, mule deer, and black bear at extended distances.
How adjustable is the Vari-Tech stock on this rifle?
Quite a bit more than most hunting stocks. You can adjust the comb height to line your eye up behind the scope, change the length of pull to fit your frame, and swap between a sporter-style grip and a more vertical grip module. It's an easy way to get a semi-custom fit without paying a gunsmith.



Reviews
There are no reviews yet.