$35.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Getting a modern optic onto a Browning A-Bolt WSSM can be a headache without the right base, and EGW solved that with this purpose-built one-piece Picatinny rail. It's cut specifically for the WSSM action, which Browning also labels as SSA, so it lines up with the factory scope mount holes on the receiver and bolts down clean. No drilling, no tapping, no guesswork.
This base is machined from domestic 6061 T6 extruded aluminum, then tumbled, sandblasted, and Type II anodized for a matte black finish that holds up to real field use. The cross slots run the full length of the rail at MIL-STD 1913 spacing, which means you can slide your rings fore and aft to dial in eye relief instead of being locked into one position. A milled center channel trims the weight down to right around two to three ounces, and in a lot of setups it won't block your factory iron sights either.
The 0 MOA cant is the right call for most hunters and general shooting inside roughly 500 yards, giving you a flat, neutral platform so your scope has plenty of adjustment range left in both directions. If you're reaching way out past 500, that's where a 20 MOA base starts to make sense, but for varmint work, deer rigs, and everyday range time the 0 MOA keeps things simple. It accepts any standard Picatinny or Weaver rings, so you're free to run whatever optic fits your rifle and budget.
EGW includes the Torx screws and a bit in the box, so you've got what you need to get it on. They recommend snugging the screws to about 20 inch-pounds with a drop of blue Loctite to keep everything locked in under recoil. Pair it with a quality set of rings and you've got a stable, repeatable foundation that holds zero shot after shot.
This base is cut for the Browning A-Bolt WSSM action, which Browning also calls the SSA. That covers the short magnum chamberings like .223 WSSM, .243 WSSM, and .25 WSSM. It does not fit the AB3, the X-Bolt, or the Mountain Titanium in .300 WSM, so it's worth confirming your rifle is a genuine A-Bolt WSSM before ordering.
The 0 MOA version here is the right pick for most shooting inside about 500 yards, since it gives you a flat, neutral platform with plenty of scope adjustment both ways. A 20 MOA base is geared toward reaching out past 500 yards when you need extra elevation. For hunting and general range use, the 0 MOA covers the vast majority of setups.
It's a standard Picatinny-style rail, so it accepts any Picatinny or Weaver scope rings. The full-length cross slots let you position your rings forward or back to nail down proper eye relief. Just match your ring height to your scope's objective size and you're set.
Yes, it ships with the #6-48 Torx screws and a T-10 bit, so you have what you need to mount it. EGW suggests tightening to around 20 inch-pounds with a drop of blue Loctite to keep everything secure under recoil. It installs on the factory scope mount holes, so no drilling or tapping is required.
| UPC | 841370106097 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 43300 |
| Color | Black |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.