Description
Browning built the X-Bolt 2 Hunter Composite LR for hunters who want magnum reach without giving up a rifle that fits them properly. Chambered in .300 Win Mag with a 5+1 capacity, it wears a 26 inch heavy sporter contour barrel with a belled muzzle, finished in non-reflective matte blue so it stays quiet in the field. The barrel is free floated and the action is bedded, which is a big part of why these rifles shoot as well as they do straight out of the box. A radial muzzle brake comes threaded on to tame the .300's bite, and you can swap it off whenever you want to run something else on the muzzle.
The Vari-Tech Stock Makes This X-Bolt 2 Fit Like It Was Built for You
The adjustable Vari-Tech synthetic stock is the headline feature here. Comb height adjusts so your eye lines up behind the scope naturally, length of pull changes with internal spacers that stay solid with no rattle, and the grip module swaps between angles to match how you shoot. Rubber overmolded grip surfaces keep things secure in rain, snow, or sweaty September afternoons, and the thick Inflex recoil pad takes real sting out of magnum recoil.
A Smoother, Sharper X-Bolt 2 Action
The second generation X-Bolt receiver adds bolt guidance surface for faster, smoother cycling, and the spiral fluted bolt with its short 60 degree lift keeps your knuckles clear of the scope. The DLX trigger is a three lever design with essentially no creep or overtravel, set at the factory around 3.5 pounds and adjustable down to 3. The steel receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base instead of two for a rock solid optic setup.
Why the Hunter LR Earns a Spot in the Truck
This is the rifle for elk across a canyon, mule deer at the edge of a big cut, or long afternoons ringing steel to stay sharp for season. The extra barrel length wrings full velocity out of the .300 Win Mag, and the adjustable stock means the rifle can grow and change with you. It is a lot of capability in one well sorted package.
Key Specifications
- Manufacturer: Browning
- Model: X-Bolt 2 Hunter Composite LR
- Manufacturer Part Number: 036130229
- UPC: 023614870609
- Caliber: .300 Winchester Magnum
- Action: Bolt Action
- Capacity: 5+1, Detachable Box Magazine
- Barrel Length: 26"
- Barrel: Heavy Sporter Contour, Threaded Muzzle with Belled Design
- Muzzle Device: Radial Muzzle Brake (Included)
- Finish: Matte Blued
- Receiver: Steel, Drilled & Tapped for X-Lock Scope Mounting
- Stock: Matte Black Vari-Tech Synthetic, Adjustable LOP & Comb
- Trigger: DLX Trigger, Adjustable 3 to 3.5 lbs
- Safety: Two-Position Tang
- Hand: Right Hand
What’s Included
- Browning X-Bolt 2 Hunter Composite LR rifle
- Detachable box magazine
- Radial muzzle brake (installed)
- Thread protector cap
- Owner's manual and cable lock
Frequently Asked Questions
Can I put a suppressor or different brake on the X-Bolt 2 Hunter LR?
Yes, the muzzle is threaded, so the included radial brake spins off and you can mount a suppressor or an aftermarket brake with the correct thread adapter. Browning also sells their Recoil Hawg brake for shooters who want even more recoil reduction. A thread protector is included if you'd rather run the barrel clean.
How adjustable is the Vari-Tech stock on this rifle?
It covers the three adjustments that matter most for fit. Comb height adjusts to align your eye with the scope, length of pull changes with internal spacers for a tight, rattle-free feel, and the grip module can be swapped to change the grip angle. Rubber overmolding on the grip areas adds traction in wet or cold conditions.
Does the X-Bolt 2 Hunter LR come with scope bases or a rail?
No, the rifle ships without sights or bases. The steel receiver is drilled and tapped for Browning's X-Lock mounting system, which secures each base with four screws instead of the usual two. You'll want to pick up X-Lock bases and rings sized for your scope before heading to the range.
Is the trigger on this Browning adjustable?
It is. The DLX trigger is a three lever design that breaks clean with no creep or take-up, and it comes set from the factory at about 3.5 pounds. You can adjust it down to roughly 3 pounds if you prefer a lighter break for long range work.



Reviews
There are no reviews yet.