Description
There is something reassuring about a laminate stock. Wood-look character with far better resistance to swelling and warping than a standard walnut blank, so your zero stays put when the weather turns ugly. That is the whole idea behind the X-Bolt 2 Hunter Laminate. Browning took their redesigned X-Bolt 2 action, dressed it in a gray laminate Hunter-style stock, and matched it with a stainless steel receiver for a sharp two-tone look that shrugs off moisture. Chambered in 6.5 PRC with a 24-inch sporter contour barrel and a 1:7 twist, it is built to push heavy, high-BC bullets way out there, which makes it a natural fit for open-country mule deer, antelope, and elk.
What the X-Bolt 2 Upgrade Brings to the Table
The second-generation X-Bolt is more than a fresh coat of paint. The receiver was reworked with additional bolt guidance surface, so the spiral-fluted bolt runs noticeably smoother, and the new ergonomic bolt knob with a short 60-degree lift cycles fast while clearing big scopes. The DLX trigger is the real star here. Its three-lever design gives you zero creep, zero take-up, and zero overtravel, preset at 3.5 pounds from the factory and adjustable down to 3.0. The action is bedded, the barrel is free-floated, and the receiver is drilled and tapped for Browning's X-Lock scope mounting system, which uses four screws per base for a seriously rigid optic setup.
A 6.5 PRC That Is Easy on the Shoulder
The 6.5 PRC has real thump on the sending end, but the included radial muzzle brake and thick Inflex recoil pad take the sting out, so you can spot your own hits and stay comfortable through a long zeroing session. The muzzle is threaded, so swapping the brake for a suppressor is simple. At around 7 pounds bare and 44 inches overall, it carries well for a 24-inch magnum-class rifle. A top-tang safety with bolt unlock button rounds out a package that feeds from a 3-round detachable magazine and is ready for whatever tag is in your pocket this fall.
Key Specifications
- Manufacturer Part Number: 036092294
- UPC: 023614866367
- Caliber: 6.5 PRC
- Action: Bolt Action, Short Action
- Barrel Length: 24 in, Sporter Contour, Free-Floated
- Twist Rate: 1:7
- Muzzle: Threaded M13x0.75 with Radial Muzzle Brake
- Capacity: 3+1, Detachable Magazine
- Stock: Gray Laminate, Hunter Style
- Receiver: Stainless Steel, Drilled and Tapped (X-Lock)
- Barrel Finish: Matte Blued
- Trigger: DLX, 3.5 lb Factory Set, Adjustable to 3.0 lb
- Safety: Top-Tang with Bolt Unlock Button
- Overall Length: 44 in
- Weight: 7 lbs 1 oz
- Recoil Pad: Inflex 1.25 in
What’s Included
- Browning X-Bolt 2 Hunter Laminate rifle
- One 3-round detachable magazine
- Radial muzzle brake
- Owner's manual
Frequently Asked Questions
Does the X-Bolt 2 Hunter Laminate come with a scope or sights?
No, it ships without sights or optics. The stainless receiver is drilled and tapped for Browning's X-Lock scope mounting system, which uses four screws per base for a very rigid setup. Plan on picking up X-Lock bases and rings when you order the rifle.
Is the trigger on the Browning X-Bolt 2 adjustable?
Yes. The DLX trigger is a three-lever design with zero creep, zero take-up, and zero overtravel. It comes set at 3.5 pounds from the factory and can be adjusted down to 3.0 pounds.
Can I run a suppressor on this rifle?
You can. The 24-inch barrel is threaded at M13x0.75, and the radial muzzle brake simply unscrews so you can attach a can with the right thread pitch or an adapter. Just re-check your zero after swapping muzzle devices, since point of impact usually shifts a bit.
How does the laminate stock compare to a synthetic or walnut stock?
Laminate is layers of wood bonded under pressure with resin, so it is far more stable than solid walnut when humidity and temperature swing. It gives you traditional wood looks with weather resistance closer to synthetic. The trade-off is a little extra weight, which as a bonus helps soak up recoil from the 6.5 PRC.



Reviews
There are no reviews yet.