Description
Browning built the X-Bolt 2 Speed Carbon Fiber SPR for hunters who run suppressors and refuse to give up accuracy to do it. The 20 inch barrel is four inches shorter than standard, so once you spin a can onto the 5/8×24 threads the overall package stays balanced and easy to swing in a blind or through thick timber. The barrel itself starts as a precision bored, button rifled stainless blank from Preferred Barrel Blanks, then gets stress relieved and wrapped in carbon fiber. That's true wrapping, not a cosmetic sleeve, which means a stiffer barrel that sheds heat and holds its point of impact. The action is bedded, the barrel free floats, and the whole barreled action wears Smoked Bronze Cerakote that outlasts bluing or bare stainless in rough weather.
A Stock That Fits You, Not the Other Way Around
The Vari-Tech composite stock is the big story on the X-Bolt 2 generation. Length of pull adjusts with internal spacers, the comb raises to line your eye up behind bigger scopes, and you can swap between sporter and vertical grip modules depending on how you shoot. Rubber overmolded grip panels keep things planted when the weather turns nasty, and the thicker Inflex recoil pad works alongside the included Recoil Hawg muzzle brake, which knocks down felt recoil by as much as 76 percent. With OVIX camo over the whole stock, it disappears into just about any terrain.
X-Bolt 2 Speed SPR Handling Details
The redesigned receiver adds bolt guidance surface for a smoother stroke, and the spiral fluted bolt with its extended handle and reshaped knob cycles fast with a short 60 degree lift that clears large optics. The DLX trigger is a three lever design with zero creep and zero overtravel, set at 3.5 pounds from the factory and adjustable down to 3. A top tang safety, bolt unlock button, and detachable rotary magazine round out the controls.
Chambered in 6.5 PRC, this rifle has the legs for cross-canyon shots on elk and mule deer while staying light enough to carry all day. It's a serious mountain rifle that happens to look as good as it shoots.
Key Specifications
- Manufacturer: Browning
- Manufacturer Part Number: 036035294
- UPC: 023614861232
- Caliber: 6.5 PRC
- Action: Bolt Action
- Barrel Length: 20 in, carbon fiber wrapped stainless steel
- Muzzle Threads: 5/8×24 with Recoil Hawg muzzle brake
- Capacity: 3+1, detachable rotary magazine
- Stock: Vari-Tech composite, adjustable LOP and comb, OVIX camo
- Metal Finish: Smoked Bronze Cerakote
- Trigger: DLX, 3.5 lb factory set, adjustable to 3 lb
- Safety: Top tang with bolt unlock button
- Sights: None, drilled and tapped for X-Lock scope mounts
- Bolt: Spiral fluted, 60 degree lift, extended handle
What’s Included
- Browning X-Bolt 2 Speed Carbon Fiber SPR rifle
- One 3-round rotary magazine
- Recoil Hawg muzzle brake
- Thread protector cap
- Interchangeable sporter and vertical grip modules
- Owner's manual
Frequently Asked Questions
Is the X-Bolt 2 Speed Carbon Fiber SPR suppressor ready?
Yes, that's the whole point of the SPR designation. The 20 inch barrel runs four inches shorter than the standard model so the rifle stays a manageable length with a can attached, and the muzzle is threaded 5/8×24. Browning includes both the Recoil Hawg brake and a thread protector, so you're covered whether you run a suppressor or not.
What can I adjust on the Vari-Tech stock?
Three things: length of pull via internal spacers, comb height to get your eye lined up behind your scope, and grip angle. It ships with both a sporter grip and a vertical grip module, so you can set it up like a classic hunting rifle or something closer to a precision rig. Everything locks down solid with no rattle.
Does this Browning X-Bolt 2 come with a scope or sights?
No, it ships without sights or optics. The receiver is set up for Browning's X-Lock scope mounting system, which uses four screws per base instead of the usual two for a rock solid hold. Plan on picking up X-Lock mounts and a quality scope to take advantage of what this barrel can do.
Is the carbon fiber barrel just for looks?
Not on this rifle. The stainless barrel comes from Preferred Barrel Blanks and is genuinely wrapped in carbon fiber after being stress relieved, rather than slipped inside a cosmetic sleeve. That construction makes the barrel stiffer than a comparable steel profile, which helps with consistency as the barrel heats up during strings of fire.




Reviews
There are no reviews yet.