Description
The .30-06 Springfield has filled more freezers than just about any cartridge out there, and Browning gave it a worthy home in the X-Bolt 2 Hunter Composite Two-Tone. This one stands out on the rack with its matte gray stainless receiver set against a matte blued 22 inch sporter contour barrel, and the black Vari-Tech stock with gray rubber overmolded grip panels ties the whole look together. The action is bedded, the barrel is free floated, and the muzzle comes threaded M13x0.75 with a stainless radial brake installed and a thread protector in the box for when you want to run it clean.
A Stock That Fits You, Not the Other Way Around
The Vari-Tech stock is the big story here. Comb height adjusts so your eye lines up behind your scope naturally, length of pull changes with internal spacers for a solid, rattle-free feel, and you can even swap the grip between the installed sporter module and the included vertical grip. Once it is set up for your frame, the rifle mounts fast and points where you look, which matters a lot more than people realize when a buck steps out with no warning. A thick 1.25 inch Inflex recoil pad takes real bite out of the .30-06, and the brake knocks it down further.
X-Bolt 2 Refinements Where They Count
Browning reworked the receiver with extra bolt guidance surface, so the spiral fluted bolt runs smooth and fast with a short 60 degree lift that clears larger optics. The DLX trigger is a three lever design with no creep, no take-up, and no overtravel, set at the factory around 3.5 pounds and adjustable down to 3. The top tang safety pairs with a bolt unlock button for safely checking the chamber, and the X-Lock scope mounting system uses four screws per base instead of the usual two.
Setting Up Your X-Bolt 2 Hunter Two-Tone
The receiver comes drilled and tapped with no iron sights, so plan on a quality scope and X-Lock bases. It feeds from a detachable 4 round rotary magazine, giving you 4+1 on board. From whitetail woods to elk country, this rifle covers a lot of ground with one setup.
Key Specifications
- Manufacturer Part Number: 036079226
- UPC: 023614865094
- Caliber: .30-06 Springfield
- Action: Bolt Action
- Barrel Length: 22 in, sporter contour, free floated
- Muzzle Thread: M13x0.75 with radial muzzle brake
- Capacity: 4+1, detachable rotary magazine
- Trigger: DLX, factory set 3.5 lb, adjustable to 3 lb
- Stock: Black Vari-Tech composite, adjustable LOP and comb
- Receiver Finish: Matte gray stainless steel
- Barrel Finish: Non-reflective matte blued
- Safety: Top tang with bolt unlock button
- Sights: None, drilled and tapped for X-Lock scope mounts
- Recoil Pad: Inflex, 1.25 in thick
- Bolt: Spiral fluted, 60 degree lift
What’s Included
- Browning X-Bolt 2 Hunter Composite Two-Tone rifle
- One 4-round detachable rotary magazine
- Stainless steel radial muzzle brake (installed)
- Thread protector cap
- Vertical grip module (sporter grip installed)
- Owner's manual
Frequently Asked Questions
Does the Browning X-Bolt 2 Hunter Composite Two-Tone come with sights?
No, this rifle ships without iron sights. The receiver is drilled and tapped for Browning's X-Lock scope mounting system, which uses four screws per base instead of the usual two for a rock-solid hold. Plan on adding X-Lock bases, rings, and a scope before heading to the range.
How adjustable is the Vari-Tech stock on this rifle?
It adjusts three ways. Comb height dials in your eye alignment behind the scope, length of pull changes with internal spacers so there is no rattle or bulk, and the grip module swaps between the installed sporter grip and the included vertical grip. That covers just about any build or shooting style without buying an aftermarket stock.
Can I adjust the trigger on the X-Bolt 2 Hunter Composite?
Yes. The DLX trigger is a three lever design with essentially zero creep, take-up, or overtravel, and it comes set from the factory at roughly 3.5 pounds. It is user adjustable down to about 3 pounds if you prefer a lighter break.
Is the muzzle brake removable if I do not want to run one?
It is. The muzzle is threaded M13x0.75, and the stainless radial brake simply unscrews. Browning includes a thread protector cap so you can run the barrel bare, and the threading also lets you install a different brake like Browning's Recoil Hawg if you want even more recoil reduction.





Reviews
There are no reviews yet.