$69.99
31 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run a suppressor on a direct impingement AR-15, you already know the problem: every trigger pull sends a puff of hot, gritty gas straight back at your eyes. The Breek Arms Sledgehammer LE ambidextrous charging handle was built specifically to deal with that, and it does the job about as well as anything on the market.
The LE version uses a smaller, low-profile latch instead of the full-size version. That's a big deal for anyone who runs a sling or works from a duty setup, because the compact latch stays out of the way and won't dig into your chest when the rifle is riding tight against you. The serrated, wider-footprint latch surfaces still give you a positive purchase from either side, so charging with gloves on stays quick and sure.
Breek didn't rely on a single trick for gas mitigation. The handle stacks several features that work together: a raised rear shelf that seals tighter against the upper receiver, a keyway cut that keeps gas from sneaking over that shelf, internal baffling inside the stem to slow and churn the gas that gets in, and ported relief cuts on the top and bottom that redirect the rest away from your face. Layered like that, it holds up on suppressed rifles where a plain upgraded handle just gets overwhelmed.
It's machined from aerospace-grade 7075-T6 aluminum and finished with a Type III hard anodize, so it takes abuse and shrugs off wear. At right around 1.1 ounces it won't upset your rifle's balance, and it drops into any standard AR-15 or M16 upper the same way a mil-spec handle does. That includes builds chambered in 300 Blackout, 6mm ARC, and other cartridges that use a standard AR-15 upper.
Install takes a couple minutes with no tools beyond your hands, and once it's in you'll notice the difference the first time you touch off a suppressed string. Cleaner sight picture, less carbon in your face, and a handle that runs smooth every time.
The LE model uses a smaller, low-profile latch instead of the full-size one. That compact profile is a favorite for duty and sling setups because it doesn't dig into your chest when the rifle is carried tight against the body. Gas mitigation and materials are the same across both versions, so you're really just choosing the latch size that suits how you carry.
Yes, and this is what the Sledgehammer is known for. It combines a raised rear shelf, a keyway cut, internal baffling, and ported relief cuts to block, slow, and redirect gas away from your face. Reviewers and users who run suppressed rifles consistently rate it among the best gas-busting handles they've tried.
It drops into any standard AR-15 or M16 upper the same way a mil-spec charging handle does. Since 300 Blackout, 6mm ARC, and similar cartridges use a standard AR-15 upper, it's compatible with those builds too. Installation takes only a minute or two and requires no special tools.
Very. You pop the rear takedown pin, pull the old charging handle and bolt carrier group, slide the Sledgehammer into the groove in your upper, then reinstall the BCG and close it up. The whole swap takes just a couple of minutes by hand.
| UPC | 812296031527 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK6035 |
| Color | Black |
| Model | |
| Product Type | Charging Handle |
| Shipping Weight | 0.0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.