Description
Anybody who has spent time at a workbench knows the feeling of reaching for a steel hammer and immediately regretting it once it marks up a part. The Grace USA 4 oz Brass Hammer solves that problem the simple way. Brass is softer than the steel it taps against, so it moves pins, punches, and stubborn small parts while leaving the surrounding metal and bluing alone. The head runs about 3/4" across the face, which makes it easy to sneak into tight spots on a receiver or action without clobbering everything nearby.
What Sets the Grace USA Brass Hammer Apart
Grace has been building these tools since 1941, and it shows in the details. The head is turned one at a time from solid CDA 360 brass rod and hand polished, then pressed onto a properly seasoned hickory handle and locked down with a brass pin. That pinned construction is the part that matters over the long haul, since a head that stays put is a head you can trust job after job. The whole thing measures right around 10 inches overall and is made start to finish in the USA.
Putting the 4 oz Brass Hammer to Work
The 4 oz weight is the light end of the Grace lineup, and that is exactly the point. It is the one you grab for delicate tapping, drifting sights, seating pins, and any close-in work where control beats brute force. Plenty of folks reach for it beyond the gun bench too, using it for stamping, chisel work, adjusting hand plane blades, and general machinist tasks where a soft face keeps parts from getting marred.
If you already run a set of brass or nylon punches, this hammer is the natural partner. It gives you enough mass to move things along without the risk that comes from swinging steel around finished metal.
Key Specifications
- Manufacturer: Grace USA
- MPN: BH-4
- UPC: 731940123442
- Head Weight: 4 oz
- Head Material: Solid CDA 360 Brass
- Face Diameter: 3/4 in
- Handle Material: Seasoned Hickory
- Overall Length: Approx. 10 in
- Color: Brass
- Country of Origin: Made in USA
What’s Included
- Grace USA 4 oz Brass Hammer (BH-4)
Frequently Asked Questions
Will the Grace USA brass hammer mar my firearm finish?
That is exactly what it is built to avoid. Brass is softer than the steel parts you are working on, so it moves pins and components while protecting bluing and finished surfaces. It is a go-to for delicate tapping where a steel hammer would leave marks.
What is the 4 oz brass hammer best used for?
The 4 oz head is the light end of the Grace lineup, made for precise, close-in work like drifting sights, seating pins, and gentle tapping. It pairs perfectly with a set of brass or nylon punches. Woodworkers and machinists also grab it for stamping and chisel work.
How is the head attached to the handle?
The brass head is pressed onto a seasoned hickory handle and secured with a brass pin. That pinned construction keeps the head locked in place through years of use, so you are not chasing a loose head down the road.
Is this brass hammer made in the USA?
Yes. Grace USA has been building tools since 1941, and this hammer is manufactured and hand assembled entirely in the United States. The brass is turned from USA-milled 360 brass rod and the hickory handle is turned here as well.





Reviews
There are no reviews yet.