$225.00
17 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who has run a can through a couple of quick mags knows how fast that tube turns into a branding iron. The Burn Proof Gear Suppressor Cover Heavy exists to solve exactly that problem, and it does it better than most. This 8.5-inch black cover fits suppressors that measure 1.5 inches in diameter, and it runs about a half inch longer than the can itself so the ends cinch down around the front and rear. That is Burn Proof Gear's no-slip fit, and it works. The cover does not walk, rotate, or creep forward under recoil the way cheap wraps tend to do.
The Heavy is a two-piece system. The outer shell is DuPont Kevlar rated to 1000 degrees Fahrenheit, which works out to roughly 180 rounds of M855 fired through it. Underneath sits a fiberglass mesh sleeve that handles up to 2000 degrees, and since that inner liner is replaceable, you can swap it out after hard range sessions instead of buying a whole new cover. The whole setup adds about a quarter inch to your suppressor's diameter and weighs only a few ounces, so it will not throw off your rifle's balance or hang up in a bag.
Beyond keeping skin, pants, and slings off hot metal, this cover kills heat mirage over the barrel, which matters a lot when you are trying to hold a precision zero after a string of fire. It also cuts down the IR signature a hot can throws off under night vision, a detail that made these covers a staple with military and hard-use crowds. It is compatible with rifle suppressors across common calibers like 5.56 NATO, .223, 300 BLK, .308, and 7.62 NATO, as long as the can is 1.5 inches across.
Burn Proof Gear builds these in the USA from fully fire-retardant materials and backs them with a lifetime guarantee. These covers are combat proven and patented, and once you run one, shooting suppressed without it feels like a step backward. Measure your suppressor's length and diameter before ordering and pick the cover size closest to a half inch over your can's length for the best fit.
Burn Proof Gear sizes its covers a half inch longer than the suppressor, so this 8.5 inch cover is built for cans right around 8 inches long with a 1.5 inch body diameter. That extra half inch lets the ends cinch around the front and rear of the suppressor for a secure fit that will not slip. Measure your suppressor before ordering, because the Heavy cover only fits 1.5 inch diameter cans.
The Kevlar outer layer is rated to 1000 degrees Fahrenheit, which translates to roughly 180 rounds of M855 fired in succession. The fiberglass inner liner underneath is rated to 2000 degrees. As a rule of thumb, a suppressor gains about 7 degrees per round of 5.56, so give the setup time to cool if it gets too hot to touch.
Not really. Once installed on a 1.5 inch can, the total diameter should stay under 1.75 inches, so it adds about a quarter inch overall. Weight is only a few ounces, so you will not notice much difference in handling or balance.
Yes, that is one of the biggest reasons precision guys run these. A bare suppressor gets hot enough to throw visible mirage right through your optic's line of sight, and the cover insulates that heat so your sight picture stays clean. It also cuts down the IR signature a hot can gives off under night vision.
| UPC | 644042980625 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BPG-SC-H-8-5-1-5-BLK |
| Color | Black |
| Model | |
| Product Type | Cover |
You must be logged in to post a review.
Reviews
There are no reviews yet.