0
0

Burn Proof Gear Omega 36M Heavy Suppressor Cover 7″ x 1.6″ Black

UPC: 680660790697

$225.00

13 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A hot can will burn through a range bag, melt a sling, and put a nasty mirage right across your optic. Burn Proof Gear's Suppressor Cover Heavy fixes all three problems on the SilencerCo Omega 36M. This 7 inch x 1.6 inch version is sized for the 36M in its full-length configuration, and the black Kevlar exterior blends in on just about any rifle build.

How the Omega 36M Heavy Cover Handles Heat

This is a two-part system, and that matters more than it sounds. The inner liner is fiberglass mesh sleeving rated to a maximum operating temperature of 2000 degrees, sitting directly against the suppressor tube. Over that goes the outer cover, built from aerospace and military grade fire retardant DuPont Kevlar rated to 1000 degrees, which works out to roughly 180 rounds of M855 fired hard. That layered construction is what lets Burn Proof Gear call this one full auto capable, and it is why these covers have earned a following with folks who run their guns hot. When the inner sleeve eventually wears from repeated installs, you can replace it instead of buying a whole new cover, which stretches the life of the whole setup considerably.

A No-Slip Fit on Your Omega 36M

A cover that rotates or creeps forward is worse than no cover at all. Burn Proof Gear sizes their covers so the ends cinch down around the front and rear of the can, locking everything in place through recoil, transitions, and position changes. Once it is snugged up on the Omega 36M, it stays put. Beyond saving your hands and pants during transitions, the cover knocks down heat mirage over the barrel for precision work and cuts the IR signature a hot suppressor throws off under night vision.

Built in the USA, Guaranteed for Life

Every Burn Proof Gear cover uses a patented design, gets made in the USA from fully fire retardant materials, and carries a lifetime guarantee. These covers have real field use behind them, and this one gives your Omega 36M the same protection without any bulk or fuss.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Manufacturer Part Number: BPG-SCC-H-7-1-6-BLK
  • UPC: 680660790697
  • Fits: SilencerCo Omega 36M (full-length configuration)
  • Cover Length: 7 inches
  • Suppressor Diameter: 1.6 inches
  • Color: Black
  • Outer Material: Fire retardant DuPont Kevlar, rated to 1000 degrees F
  • Inner Liner: Fiberglass mesh sleeving, rated to 2000 degrees F
  • Construction: Two-piece system with replaceable FR inner sleeve
  • Rating: Full auto capable
  • Made In: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy suppressor cover (outer Kevlar cover)
  • Fire retardant fiberglass inner sleeve

Frequently Asked Questions

Will this cover fit my Omega 36M in the short configuration?

This 7 inch version is sized for the Omega 36M running its full-length configuration. Burn Proof Gear sizes covers slightly under the can's length so the ends cinch down for a no-slip fit. If you mostly run the 36M in its short setup, grab the shorter version of this cover instead.

How much heat can the Burn Proof Gear Heavy suppressor cover take?

The Kevlar outer shell is rated to 1000 degrees Fahrenheit, which Burn Proof Gear estimates at roughly 180 rounds of M855 fired in quick succession. Underneath, the fiberglass mesh liner handles up to 2000 degrees against the tube itself. That combination is why the Heavy model carries a full auto capable rating.

Can I replace the inner sleeve when it wears out?

Yes, and that is one of the best parts of this design. The two-piece system separates the outer Kevlar cover from the fiberglass inner sleeve, so when the liner shows wear from repeated installs and removals, you swap just the sleeve. It keeps the cover in service far longer than a one-piece wrap.

Will the cover slip or rotate on the suppressor during firing?

No. Burn Proof Gear builds these to cinch around the front and rear of the suppressor, which is what they call their no-slip fit. Once tightened down on the Omega 36M it stays planted through recoil, transitions, and rough handling.

Additional information

UPC

680660790697

Manufacturer

Manufacturer Part Number

BPG-SCC-H-6-5-1-6-BLK

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Omega 36M Heavy Suppressor Cover 7″ x 1.6″ Black”