$225.00
12 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A hot suppressor will ruin your day fast. Brush it against your leg on a transition, set it on a pack strap, or grab it out of habit and you will remember it for a week. Burn Proof Gear built this Custom Heavy cover to solve that exact problem, and this particular size, 5.75 inches by 1.8 inches, is cut to fit HUXWRX FLOW series suppressors like the FLOW 762 Ti. If your can matches those dimensions, this cover slides on and stays put.
This is a two-part system, not just a sleeve of fabric. The outer shell is DuPont Kevlar rated to 1000 degrees Fahrenheit in this black colorway, and underneath it sits a replaceable fiberglass FR sleeving liner rated to 2000 degrees. When the inner sleeving eventually wears from heavy use, you swap it out instead of buying a whole new cover, which stretches the life of the thing considerably. The cover cinches down at both ends for Burn Proof Gear's no-slip fit, so it stays locked in place through rapid strings instead of creeping down the tube. It is full-auto capable, though the smart move is letting things cool once the cover gets too hot to handle, which typically happens around 90 rounds fired in quick succession.
Flow-through cans like the HUXWRX FLOW series vent gas out the front end cap, and that matters for cover fitment. This custom cut leaves the vented front of the suppressor exposed so the can works exactly as designed while the body stays wrapped. Beyond burn protection, the cover knocks down heat mirage over the tube, which precision guys will appreciate on longer strings, and it cuts the IR signature a hot can throws off under night vision.
Burn Proof Gear covers have a real track record with military and law enforcement users, and the company backs them with a lifetime guarantee. If you run a FLOW 762 Ti hard, this is a cheap insurance policy for your legs, your sling, and your patience.
This is a custom cut for HUXWRX FLOW series suppressors, with the FLOW 762 Ti being the primary match. Burn Proof Gear sizes covers about a half inch longer than the suppressor tube so the ends can cinch down for a no-slip fit. If your can measures close to those dimensions, check Burn Proof Gear's size chart to confirm before ordering.
No. These custom FLOW cuts are sized to leave the vented front end cap exposed so gas can exit the way HUXWRX designed it. The cover wraps the body of the tube where the heat lives while keeping the business end clear.
The black Kevlar outer shell is rated to 1000 degrees Fahrenheit, and the fiberglass inner sleeving is rated to 2000 degrees. It is full-auto capable, but the manufacturer recommends letting everything cool once the cover is too hot to touch, which usually lands around 90 rounds of rapid fire. As a reference point, a suppressor gains roughly 7 degrees per round with 5.56.
That is the nice part of the two-piece design. The fiberglass FR sleeving is replaceable, so you can swap in fresh sleeving instead of replacing the entire cover. It keeps the cover in service a lot longer, and Burn Proof Gear backs the product with a lifetime guarantee.
| UPC | 680660790420 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BPG-SCC-H-5-75-1-8-BLK |
You must be logged in to post a review.
Reviews
There are no reviews yet.