$12.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Hoppe's BoreSnake has earned its reputation as one of the fastest ways to run a barrel clean, and the Den version wraps that same pull-through rope in a smart little case that lives easily in a range bag or hunting pack. This one covers 6.5mm, .257, .260, and .264 caliber rifles, so it fits everything from a .25-06 up through the 6.5 Creedmoor crowd. Drop the brass weight down the chamber, feed it out the muzzle, and pull. The integrated bronze brush loosens carbon and fouling while the braided tail behind it swabs the bore, giving you a cleaning surface far larger than a single patch on a rod.
The standout here is the case itself. The lid snaps off and doubles as a T-handle, so instead of wrapping cord around your knuckles you just grab the handle and pull straight through. Straight-line pulls are the trick to getting the most out of a BoreSnake, and having a solid handle makes that a whole lot easier when you are working in cold weather or in a hurry between strings. When you are done, the snake coils right back into the clear case and the handle clicks in for storage. The brass pull weight is stamped with the caliber size, so you will never grab the wrong snake out of the bag.
A few drops of Hoppe's No. 9 on the brush section and a little oil on the tail will do the job for most range and field cleaning. When the snake starts looking grimy, it is fully machine washable. Toss it in a mesh bag on a gentle cycle, hang it to dry, and it is ready for the next round. Most folks find one or two passes is plenty for routine maintenance, though a heavily fouled bore still benefits from a proper rod and brush session at the bench. For quick cleanups, knocking down fouling before a detailed clean, or wiping the bore before storage, it is tough to beat.
This model is sized for 6.5mm rifles along with .257, .260, and .264 caliber bores. That covers popular rounds like the 6.5 Creedmoor, .260 Remington, .25-06, and .257 Roberts. The brass pull weight is stamped with the size so you can confirm it at a glance.
The lid of the Den case pops off and serves as a T-handle you grip to pull the snake through the bore. It saves you from wrapping the cord around your hand, which makes pulling easier and more controlled. When you are finished cleaning, the handle snaps back into the clear case for storage.
Yes, the BoreSnake is machine washable and built to be reused many times. Place it in a mesh laundry bag, run it on a gentle cycle with a little mild detergent, then hang it to air dry. Replace it once the brush or braid shows real wear.
For routine range or field cleaning, one or two straight-line pulls usually do the job thanks to the integrated bronze brush and large swabbing surface. Adding a few drops of solvent to the brush and oil to the tail improves results. A heavily fouled or neglected barrel may still call for a rod, brush, and patches at the bench.
| UPC | 026285001020 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 24013D |
| Caliber/Gauge | .25 Caliber |
| Length | 4.1500 |
| Model | |
| Product Type | Bore Cleaner |
| Quantity | 1 |
| Shipping Weight | 0.16 |
| Style | Rifle |
You must be logged in to post a review.
Reviews
There are no reviews yet.