0
0

Bond Arms Snake Slayer IV .357 Mag/.38 Spl 4.25″ Stainless Derringer

UPC: 855959001611

$590.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There is something satisfying about a gun that does one job and does it with real craftsmanship. The Bond Arms Snake Slayer IV is a two-shot, break-action derringer chambered in .357 Magnum that also runs .38 Special, built entirely from stainless steel with a satin polish finish. Where the standard Snake Slayer wears a 3.5 inch barrel, this one stretches to 4.25 inches, and that extra length matters more than you might think. You get higher velocities out of the same ammo and noticeably softer recoil, which counts for a lot when you are touching off magnum loads from a 23.5 ounce handgun.

Why the Snake Slayer IV Handles Better Than It Looks

The extended rosewood grips are the other half of the story. Smaller derringers tend to leave your pinky hanging in the wind, but the Snake Slayer IV gives your whole hand a place to be, which makes a real difference in control with full-power .357 loads. Owners consistently report that magnum recoil is far more manageable than expected, and .38 Special feels downright mild. Feeding it .38s at the range and carrying .357 for serious work is a sensible way to run this gun. A ramped blade front sight and fixed rear keep aiming simple at the close distances this platform is built for.

Bond Arms Build Quality and Smart Engineering

Bond Arms machines these in Granbury, Texas, and the fit and finish show it. The action uses a patented rebounding hammer, retracting firing pins, a cross-bolt safety, and a spring-loaded cammed locking lever, so it carries safely and locks up tight. A removable trigger guard and automatic spent-case extractor round out the practical touches.

One Frame, a Whole Family of Barrels

Here is the part that turns this from a single-purpose pistol into a platform: the Snake Slayer IV frame accepts all standard Bond Arms interchangeable barrels. Pick up a .45 Colt/.410 barrel, a 9mm, or just about anything else in the lineup, and you have a different gun in minutes with a single hex wrench. At 6.25 inches overall, it tucks away easily whether it rides in a holster, a tackle box, or a saddlebag.

Key Specifications

  • Manufacturer: Bond Arms
  • Model: Snake Slayer IV
  • MPN: BASS4 – 357/38
  • UPC: 855959001611
  • Caliber: .357 Magnum / .38 Special
  • Capacity: 2 Rounds
  • Action: Break Action, Single Action Only
  • Barrel Length: 4.25"
  • Overall Length: 6.25"
  • Weight: 23.5 oz
  • Frame/Barrel Material: Stainless Steel, Satin Polish Finish
  • Grips: Extended Rosewood
  • Sights: Ramped Blade Front, Fixed Rear
  • Safety: Cross-Bolt Safety, Rebounding Hammer, Retracting Firing Pins
  • Barrel Compatibility: Accepts All Standard Bond Arms Interchangeable Barrels

What’s Included

  • Bond Arms Snake Slayer IV derringer with 4.25" .357 Mag/.38 Spl barrel
  • Extended rosewood grips (installed)
  • Removable trigger guard (installed)
  • Owner's manual

Frequently Asked Questions

Can the Snake Slayer IV shoot .38 Special as well as .357 Magnum?

Yes, and that is one of its best features. Since .38 Special is just a shorter version of the .357 Magnum case, it chambers and fires without any changes to the gun. Plenty of owners run .38s for practice since they feel very mild out of this 23.5 ounce stainless frame, then load .357 when it counts.

Do other Bond Arms barrels fit the Snake Slayer IV frame?

They do. The Snake Slayer IV accepts all standard Bond Arms interchangeable barrels, so you can swap to .45 Colt/.410, 9mm, .45 ACP, and other chamberings with a simple hex wrench. It is one frame that can wear a lot of different hats, which is a big part of the appeal of the Bond Arms lineup.

How bad is the recoil with .357 Magnum loads?

Less punishing than you would guess. The 4.25 inch barrel adds weight up front and the extended rosewood grips give your whole hand purchase, both of which soak up recoil compared to shorter, smaller-gripped derringers. Full-power .357 gets your attention, but most folks find it very manageable, and .38 Special is a soft shooter in this gun.

What is the difference between the Snake Slayer and the Snake Slayer IV?

The barrel length is the main difference. The standard Snake Slayer runs a 3.5 inch barrel while the IV stretches to 4.25 inches, which delivers higher velocities, a longer sight radius, and softer felt recoil. Both share the same stainless construction, extended grips, and barrel interchangeability.

Additional information

UPC

855959001611

Manufacturer

Manufacturer Part Number

BASS4 – 357/38

Action

ATF Type

Pistol

Barrel Length

4.25"

Caliber/Gauge

.357 Magnum

Capacity

0

Color

Stainless

Length

10.4500

Number of Magazines

0

Package Height

2.9

Package Width

7.9

Product Type

Specialty Handgun

Shipping Weight

2.1

Sights

Front Blade/Fixed Rear

Sights Type

FIXED

Reviews

There are no reviews yet.

Be the first to review “Bond Arms Snake Slayer IV .357 Mag/.38 Spl 4.25″ Stainless Derringer”