Description
Berry's has been plating pistol bullets for decades, and this .45 ACP 200 grain Target Hollow Point is one of their steady sellers for a reason. Each projectile starts as a swaged lead core, gets electroplated with copper to its final weight, then runs back through a carbide die to be re-struck to exact dimensions. That double-struck process is what gives these bullets their edge over cast lead, with no exposed lead and far less barrel fouling to deal with when you're done shooting.
What Sets the Berry's Target Hollow Point Apart
The Target HP profile is similar to a flat point but the hollow nose cuts a cleaner hole through paper, which makes scoring easier at the range. The longer bullet profile also gives more bearing surface against the rifling, and that extra contact helps stabilize the bullet for better accuracy. Sized at .452" and weighing a true 200 grains, these feed well through 1911s and other .45 ACP platforms. Worth noting that despite the hollow point shape, this is a target projectile built for range work rather than an expanding defensive bullet.
Loading the Berry's .452" 200 gr Plated Bullets
These respond well to published cast or jacketed load data at the same weight and profile, so you don't need special plated data to get started. You can run a taper or roll crimp, just don't overdo it, since over-crimping can cut into the plating and cause core separation. Keep your velocities at or below 1,250 fps and these bullets will reward you with consistent performance round after round.
Coming in a box of 500, this quantity is built for the handloader who shoots .45 regularly and wants a clean-shooting, affordable projectile that punches tidy holes without breaking the bank on jacketed rounds.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Manufacturer Part Number: 00213
- UPC: 711148002138
- Caliber: .45 ACP / .45 Caliber
- Bullet Diameter: .452"
- Bullet Weight: 200 Grain
- Bullet Style: Target Hollow Point (THP)
- Construction: Copper Plated, Swaged Lead Core, Double-Struck
- Maximum Velocity: 1,250 fps
- Bullet O.A.L.: 0.529"
- Recommended Cartridge O.A.L.: 1.205"
- Quantity: 500 per box
- Loaded Ammunition: No, component bullets only
What’s Included
- 500 Berry's Superior Plated .45 ACP .452" 200 gr Target Hollow Point bullets
Frequently Asked Questions
Are these Berry's 200 gr Target Hollow Points loaded ammunition?
No, these are component bullets for handloading only. You'll need your own brass, primers, and powder to assemble finished cartridges. They're intended for reloaders building their own .45 ACP ammo.
What load data should I use with Berry's .452" plated bullets?
Berry's recommends using published cast or jacketed data for the same weight and profile, which makes finding a recipe easy since most manuals and powder maker websites list 200 grain .45 ACP data. Just keep your velocities at or below 1,250 fps to protect the plating. Start low and work up like you would with any load.
Can I use a roll crimp on these plated bullets?
You can use either a taper or a roll crimp with Berry's plated bullets. The key is not to over-crimp, since cutting too deeply into the plating can lead to core separation and copper fouling. A light, consistent crimp is all you need.
Is the Target Hollow Point a defensive or expanding bullet?
No, the Target HP is designed for range and paper punching rather than self-defense expansion. The hollow nose cuts a cleaner hole in paper and the longer profile adds bearing surface for accuracy. For carry loads you'd want a dedicated defensive projectile instead.




Reviews
There are no reviews yet.