Description
Berry's Superior Plated bullets give you a sweet spot between cheap cast lead and pricey jacketed when you're loading up 40 S&W or 10mm. These are 180 grain flat points measuring .401 in diameter, with a swaged lead core that gets electroplated in copper to its final weight. That copper skin seals the lead in, so you get clean range sessions without the smoke and lube mess that comes with bare lead bullets.
How Berry's Builds the Superior 180gr Flat Point
The process starts with a uniform swaged lead core, then each one is plated in copper to final weight and re-struck in a carbide die. That last step tightens up the dimensions and locks the plating to the core, which is what keeps these feeding smoothly and shooting consistent round after round. The flat point profile is a solid all-around choice for target work and feeds reliably through most semi-auto 40s and 10mms, and it drops right into revolvers chambered in 10mm too.
Loading the Superior Plated .401 180gr
These are rated for velocities up to 1,250 fps, which covers the vast majority of practice and mid-range loads in both cartridges. Berry's recommends working with low to mid-range jacketed or lead data for the same weight and profile, starting low and working up while keeping an eye on that velocity ceiling. Push past it and you risk stripping plating off the core, so there's no reason to crowd the top end for range ammo.
The one thing seasoned reloaders will tell you about any plated bullet applies here: go easy on the crimp. A light taper crimp in the autos works great, and the goal is just to remove the case bell without biting through the thin plating. Bell your case mouths enough that you aren't shaving copper on seating, and you'll get clean, accurate rounds all day. With 500 in the pack, this is a smart way to keep your 40 S&W or 10mm fed through a lot of trigger time.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Manufacturer Part Number: 27471
- UPC: 711148274719
- Caliber: 40 S&W / 10mm
- Bullet Weight: 180 Grain
- Bullet Diameter: .401"
- Bullet Style: Flat Point
- Construction: Copper Plated Swaged Lead Core
- Maximum Velocity: 1,250 fps
- Bullet Overall Length: .596"
- Quantity: 500 Count
What’s Included
- 500 Berry's Superior Plated 40 S&W/10mm .401 180gr Flat Point bullets
Frequently Asked Questions
What load data should I use for Berry's Superior 180gr plated bullets?
Berry's recommends using low to mid-range jacketed or lead data for the same 180 grain weight and flat point profile. Always start low and work your charge up carefully while keeping velocity at or below the 1,250 fps rating. Reputable powder makers like Hodgdon, Alliant, and Accurate publish usable data you can reference.
How fast can I push these Superior plated bullets?
These standard plated bullets are rated for a maximum velocity of 1,250 fps. Staying under that ceiling keeps the copper plating bonded to the core for best accuracy. Running them significantly faster risks stripping the plating in the bore, which leads to tumbling and poor performance.
Do these work in both 40 S&W and 10mm?
Yes. At .401 diameter and 180 grains, these flat points are a standard fit for both the 40 S&W and 10mm Auto. The flat point profile feeds well in most semi-autos and also works in revolvers chambered for 10mm.
How should I crimp Berry's plated bullets?
Keep the crimp light. A gentle taper crimp works well in autoloaders, and the idea is simply to remove the case bell rather than squeeze down hard. Flaring your case mouth enough on expansion also prevents shaving copper during seating, which protects accuracy.




Reviews
There are no reviews yet.