$55.99
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Berger Classic Hunter 6.5mm (.264) 135 gr is built for folks who want serious accuracy out of a factory or magazine-fed rifle without giving up terminal performance on game. It carries the same hybrid ogive found on Berger's target line, which blends tangent and secant nose shapes to cut wind drift, boost efficiency, and take some of the fuss out of finding a good seating depth. With a G1 BC of 0.584 and a G7 of 0.303, this is a slick, flat-shooting projectile that holds velocity well downrange.
Berger designed this bullet to fit within SAAMI dimensions, meaning it seats to magazine length and feeds smoothly for quick follow-up shots. That's a big deal if you're running a standard short-action rifle and don't want to single-feed. The nose is a touch shorter than Berger's VLD and Hybrid Target bullets, which is what lets it play nice in a magazine while still carrying a strong ballistic coefficient. Reloaders have found it forgiving to work up a load for, and plenty of folks report half-MOA accuracy once they dial in their rifle.
This one gets its killing power from the thinner J4 Precision hunting jacket. On impact, the bullet drives a couple inches into the animal before it begins to expand violently, dumping energy and creating a large wound cavity inside the vitals. Field reports back this up across whitetail, mule deer, antelope, bear, and even elk at the right range. It's a rapid-expansion design, so shot placement in the vitals is where it shines rather than hammering heavy bone.
A 1:8" twist or faster is the recommendation to stabilize the 135 gr properly, so most modern 6.5 Creedmoor, 6.5 PRC, 6.5×47, and 6.5 SAUM barrels are right at home. The .264 diameter, 1.325" overall length, and 0.277 sectional density make it an easy swap into most 6.5 hunting loads. If your rifle likes Berger bullets, odds are good this one will be tack-driver accurate while still getting the job done in the field.
Berger recommends a 1:8" twist or faster to fully stabilize this 135 gr bullet. Most current 6.5 Creedmoor, 6.5 PRC, and similar factory barrels come with an 1:8" twist, so they're a good match. If your rifle has a slower twist, stability can suffer, so check your barrel before loading these up.
Yes. Unlike Berger's VLD and Hybrid Target bullets, the Classic Hunter was designed with a shorter hybrid nose that conforms to SAAMI dimensions. That lets it seat at standard magazine lengths and feed reliably for quick follow-up shots in factory and magazine-fed rifles.
The thinner J4 hunting jacket lets it penetrate a couple inches before expanding rapidly, dumping energy inside the vitals and creating a large wound cavity. Hunters have taken deer, antelope, bear, and elk with it successfully when shots land in the vital zone. It's a rapid-expansion design, so it rewards good shot placement over trying to punch through heavy bone.
It is. The hybrid ogive is the same shape that drives Berger's match line, and plenty of handloaders report half-MOA groups once they find the right load. A lot of folks also note it's less finicky to tune than the VLD, which makes it a solid dual-purpose choice for the field and some range time.
| UPC | 679459265713 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 26571 |
| Bullet Caliber | 6.5mm |
| Caliber/Gauge | 6.5MM |
| Grains | 135 |
| Product Type | Classic Hunter |
| Quantity | 100 |
| Shipping Weight | 2.03 |
| Units per Box | 100 |
You must be logged in to post a review.
Reviews
There are no reviews yet.