Description
Bergara built its name on barrels that shoot, so it makes sense their first suppressor was designed around accuracy above all else. The BTi-30 is a .30 caliber can made in the USA from 3D-printed Grade 5 titanium, and Bergara engineered it to minimize point-of-impact shift and tighten groups by as much as 25 percent compared to a bare muzzle or a traditional suppressor. At 6.5 inches long and just 12.9 ounces, it hangs off the end of a hunting rifle without turning it into a boat anchor, and it's rated all the way up to 300 RUM on a 16 inch barrel, so magnum hunters are covered too.
Two End Caps, Two Personalities
Here's the feature that sets the BTi-30 apart: it ships with both a vented and a sealed stainless end cap, and you can swap between them with a simple 5/8 inch socket. Run the vented cap when precision matters most. It bleeds off peak pressure in the blast chamber, which means faster recovery between shots, less gas blowing back at the bolt face and your eyes, and steadier accuracy. Screw on the sealed cap when you want every last decibel of sound reduction. It's like getting two suppressors in one tax stamp.
Mounting the BTi-30 Without the Headaches
The rear of the can uses the industry-standard 1.375×24 HUB interface, so you're never locked into proprietary mounts. Out of the box it comes with Bergara's 5/8-24 direct-thread mount that indexes off the muzzle crown, a smart touch that keeps everything aligned shot after shot. If you'd rather run a quick-detach setup or a different thread pitch down the road, just about any HUB mount on the market will thread right in.
The helical fluting machined into the body isn't just for looks either. It adds surface area to help the can shed heat faster during longer strings, and the whole thing wears a high-temp C-Series Graphite Black Cerakote that shrugs off weather and field abuse. Backed by Bergara's limited lifetime warranty, this is a can built to live on your rifle for good.
Key Specifications
- Model: BTi-30
- Manufacturer Part Number: BTi-30B
- UPC: 043125930012
- Caliber: .30 Caliber (rated .22 LR up to .300 RUM, 16" barrel)
- Material: Grade 5 Titanium body, Stainless Steel mount and end caps
- Overall Length: 6.5 inches
- Diameter: 1.75 inches
- Weight: 12.9 oz
- Mounting System: HUB compatible (1.375×24 TPI)
- Included Mount: 5/8-24 muzzle-indexing direct-thread mount
- Finish: C-Series Graphite Black Cerakote body, Nitride mount and end caps
- End Caps: Interchangeable vented and sealed (5/8" socket swap)
- Construction: 3D-printed, helical external fluting
- Country of Origin: USA (Lawrenceville, GA)
- Warranty: Bergara Limited Lifetime Warranty
What’s Included
- Bergara BTi-30 suppressor
- 5/8-24 TPI Bergara stainless HUB-compatible direct-thread mount
- Vented stainless end cap
- Sealed (non-vented) stainless end cap
Frequently Asked Questions
What calibers can the Bergara BTi-30 handle?
It covers everything from .22 LR up to .300 Remington Ultra Mag on a 16 inch barrel. That range takes in the popular precision and hunting rounds like 6.5 Creedmoor, .308 Win, and .300 Win Mag, so one can covers your whole rifle safe.
Is the BTi-30 HUB compatible?
Yes, it uses the industry-standard 1.375×24 HUB interface, so it works with most direct-thread, taper, and quick-detach mounts on the market. It ships with Bergara's own 5/8-24 direct-thread mount that indexes off the muzzle crown for consistent alignment.
What's the difference between the vented and sealed end caps?
The vented cap reduces peak pressure in the blast chamber, which cuts blowback, speeds up recovery between shots, and favors accuracy. The sealed cap prioritizes maximum sound reduction. Both swap out with a standard 5/8 inch socket, so switching takes seconds.
How heavy is the BTi-30 and will it throw off my rifle's balance?
It weighs 12.9 ounces thanks to its Grade 5 titanium construction, which is light for a .30 cal can rated to magnum pressures. At 6.5 inches long, it keeps a hunting rifle manageable in the field, and Bergara designed it to minimize point-of-impact shift so your zero stays put.





Reviews
There are no reviews yet.