Description
The Bergara ST1 is a self-timing muzzle brake built for .30-caliber rifles running a 5/8×24 threaded barrel. The star of the show here is the angled baffle design, which applies downward pressure and directs gas away from your line of sight instead of kicking dirt up in front of you. The payoff is a big drop in felt recoil and a muzzle that stays put shot after shot, which is exactly what you want when you're trying to spot your own hits or line up a quick second shot.
What Self-Timing Means on the ST1
One of the best parts about the ST1 is how simple it is to put on. Because it's self-timing, you don't have to mess with crush washers, shims, or guessing whether the ports are lined up right. Bergara includes a wrench and a bubble level in the box, so you level your rifle, thread the brake on, snug it down, and confirm everything sits true. Most folks find it goes on in a few minutes with no gunsmith trip required.
Built to Take a Beating
The ST1 is machined from 17-4 grade stainless steel and wears a black nitride finish, so it holds up to heat, weather, and the corrosion that eats cheaper brakes alive. It measures 2.5 inches long with a 1-inch body diameter and a 1.10-inch locking nut, so it adds real recoil control without turning your rifle into an unwieldy club. The .328 to .338 inch bore clearance keeps things safe and clean for .30-cal projectiles.
While it's a natural match for Bergara rifles like the B-14 and HMR line, the 5/8×24 thread pitch is the standard for .30-caliber barrels, so it'll bolt right up to plenty of other platforms too. If you've been fighting a stout-recoiling .308, .30-06, or magnum and want a cleaner sight picture and a shoulder that isn't sore by the end of a range day, this is a solid pick.
Key Specifications
- Manufacturer: Bergara
- Model: ST-1
- Manufacturer Part Number: BA0006
- UPC: 043125000159
- Product Type: Muzzle Brake
- Caliber: .30 Caliber
- Thread Pattern: 5/8×24 tpi
- Bore Diameter: .328 – .338 in
- Material: 17-4 Grade Stainless Steel
- Finish: Black Nitride
- Length: 2.50 in
- Body Diameter: 1.00 in
- Locking Nut Diameter: 1.10 in
- Timing: Self-Timing (no shims or crush washers)
What’s Included
- Bergara ST1 muzzle brake (.30 cal)
- Installation wrench
- Bubble level
Frequently Asked Questions
Is the Bergara ST1 hard to install?
Not at all. The ST1 is self-timing, so there's no need for crush washers or shims to get the ports lined up correctly. It comes with a wrench and a bubble level, so you level the rifle, thread the brake on, and torque it down while checking that it sits true. Most owners get it on in just a few minutes at home.
Will the ST1 fit rifles other than Bergaras?
Yes. It uses a 5/8×24 thread pattern, which is the common standard for .30-caliber rifle barrels. That means it drops right onto plenty of platforms beyond Bergara, including many .308, .30-06, and .300 magnum rifles with matching threads. Just double-check your muzzle threads before ordering.
How much does the ST1 actually reduce recoil?
The angled baffle design pushes gas down and out to the sides rather than into your line of sight, which delivers a noticeable cut in felt recoil and keeps muzzle rise to a minimum. On stouter .30-cal cartridges the difference is easy to feel, making it far more comfortable to shoot and easier to stay on target. Like any brake, it does add some noise at the shooter's position.
What is the ST1 made of and will it hold up outdoors?
The ST1 is machined from 17-4 grade stainless steel and finished in black nitride. That combination resists heat, wear, and corrosion, so it stands up well to hard range use and rough weather in the field. It's a durable brake built to last through plenty of rounds.





Reviews
There are no reviews yet.