Description
If you've been wanting to put glass or a red dot on your Benelli SuperNova pump, this EGW rail is the clean way to do it. It's a one-piece Picatinny base built to mount to the receiver and give you a solid, no-nonsense foundation for whatever optic you're running. EGW machines these from extruded 6061 T6 aluminum and finishes them in a matte black Type II anodize, so it blends right in with the shotgun and holds up to real use.
What the EGW SuperNova Rail Brings to the Table
This is a true MIL-STD 1913 Picatinny rail, with full-width cross-slots gauged to +/- .002 inches. That tight tolerance matters because it means your rings and your optic sit exactly where they should, and the full run of slots lets you slide things fore and aft to nail down eye relief. It's cut at 0 MOA, so you're getting a flat, no-cant base that's ideal for the close-to-mid ranges most SuperNova owners are working with, whether that's slugs, turkey loads, or a home-defense setup.
Built Light Without Giving Up Strength
EGW milled a channel down the center of this mount to drop weight, so you're adding roughly two ounces to the gun instead of a heavy slab of metal. In a lot of cases that center channel also leaves your factory iron sights usable, which is a nice bonus if you like a backup. The rail is ambidextrous and accepts both Picatinny and Weaver-style rings, so you're not locked into one brand of ring or one type of optic.
Mounting Your EGW Benelli SuperNova Base
Installation is straightforward with the included Torx hardware. EGW recommends torquing the screws to 20 inch-pounds and adding a drip of blue Loctite so nothing walks loose under 12 gauge recoil. One thing worth checking before you order: not every SuperNova receiver leaves the factory drilled and tapped, so confirm your gun's hole spacing matches this mount before installing.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 46000
- UPC: 841370106417
- Model Fit: Benelli SuperNova Pump
- Mount Type: One-Piece Picatinny Rail
- Elevation: 0 MOA
- Material: 6061 T6 Extruded Aluminum
- Finish: Matte Black Type II Anodized
- Overall Length: 5.88 inches
- Height: 0.4 inches (top of receiver to top of rail)
- Center Spread: 2.05 inches
- Weight: Approximately 2 oz
- Hand Orientation: Ambidextrous
- Cross-Slot Spec: MIL-STD 1913, +/- .002"
- Mounting Hardware: #8-40 Torx screws
- Country of Origin: Made in USA
What’s Included
- EGW Benelli SuperNova one-piece Picatinny scope base
- Socket head Torx mounting screws
- Torx wrench/bit
Frequently Asked Questions
Will this EGW rail fit my Benelli SuperNova out of the box?
It's designed to mount to the SuperNova pump receiver using the factory scope mount holes. Keep in mind that not every SuperNova leaves the factory drilled and tapped, so it's smart to check whether your receiver has the holes and that the spacing matches this mount before you install. If your gun is set up for it, the fit is clean and solid.
What kind of scope rings do I need with this Picatinny base?
This is a true MIL-STD 1913 Picatinny rail, so it accepts both Picatinny and Weaver-style rings. That gives you a lot of freedom in ring choice and height depending on the optic you're mounting. Just match your ring height to your scope or red dot for proper clearance.
Does the 0 MOA rail work well for slugs and optics on a 12 gauge?
Yes. The 0 MOA flat base is well suited to the close-to-mid ranges most SuperNova owners shoot, whether that's slugs, turkey hunting, or a defensive build. The 6061 T6 aluminum construction and tight tolerances handle 12 gauge recoil without shifting your zero when it's properly torqued and Loctited.
Will this mount block my factory iron sights?
The milled center channel on this EGW rail is designed to keep things light, and in many cases it also leaves the factory iron sights usable underneath. Clearance can vary depending on your exact setup, so it's worth eyeballing before final install if running backup irons matters to you.





Reviews
There are no reviews yet.