$99.95
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The BCM Gunfighter Compensator Mod 1 is Bravo Company's answer to a big-bore muzzle device that does its job without turning the range into a concussion zone. Built for AR-platform rifles chambered in .308 and 7.62 NATO, it threads onto 5/8-24 barrels and works well on many 300 AAC Blackout setups too. What sets it apart from a standard side-ported brake is the balance: it flattens muzzle rise and cuts felt recoil, but it doesn't punish everyone standing to your left and right.
Inside the unit you've got tuned slots working with an interior cone to manage recoil, tame muzzle rise, and knock down flash. Bravo pairs that with a dual-action brake that reduces lateral pressure and the ear-splitting side blast you get from a lot of aggressive brakes. That's the whole point of the design. It was built for tactical and team use, so it stays effective for close-quarters work where side concussion matters. Folks running it on shorter 300 Blackout barrels report very little flash, and .308 shooters describe the recoil dropping closer to a milder-caliber feel.
The body is machined from stainless steel, which holds up well against the heat and corrosion that come with the territory at the muzzle. One thing worth knowing: the exterior dimensions follow mil-spec geometry, so it plays nice with blank-firing adapters and flash-hider-mounted suppressors that use an A2-pattern interface. That makes it a smart pick if a can is somewhere in your future.
Here's the tip that trips people up. You'll need a thin wrench to torque this one down. A standard armorer's wrench or a regular box wrench is too thick to seat properly on the flats, so grab a thin 3/4-inch box wrench before you start. It ships with a crush washer, and BCM recommends install by a qualified armorer. Time the device, clock it straight, and you're set for thousands of rounds.
It's threaded 5/8-24, which is the standard pitch for .308 and 7.62 NATO AR-10 style barrels. It also works on many 300 AAC Blackout barrels that use the same 5/8-24 threading. Just confirm your barrel's thread pitch before ordering.
Yes. The flats on this comp are set up for a thin wrench, so a standard armorer's wrench or a regular box wrench won't seat correctly. A thin 3/4-inch box wrench is the tool you want, and BCM recommends installation by a qualified armorer.
The exterior dimensions follow mil-spec geometry, so it works as a mounting surface for flash-hider-mounted suppressors built for the A2 pattern, along with blank-firing adapters. That makes it a solid host if you plan to add a can down the road. Check your specific suppressor's mount requirements to be sure.
The tuned slots and interior cone work together to flatten muzzle rise and soften felt recoil noticeably. Users running it on .308 rifles describe the recoil impulse dropping toward a much milder feel, with quick, smooth return to target. The dual-action brake design also keeps side blast lower than a lot of aggressive competition-style brakes.
| UPC | 855877004688 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | GFCMOD1762 |
| Caliber/Gauge | .308 / 7.62 NATO |
| Color | Black |
| Length | 6.2500 |
| Model | |
| Product Type | Compensator |
| Thread Pattern | 5/8"-24 tpi |
You must be logged in to post a review.
Reviews
There are no reviews yet.