Description
The Barnes Tipped TSX is what happens when one of the most respected hunting bullets ever made gets a polymer tip bolted onto the nose. This 7mm (.284) 140-grain version is built on a 100-percent copper body with multiple relief grooves cut into the shank, and it carries a G1 ballistic coefficient of .412 with a sectional density of .248. That tip does two jobs: it streamlines the nose for a better BC and flatter flight downrange, and it kicks off fast, consistent expansion the moment it hits game. There's no lead anywhere in this bullet.
What Sets the TTSX 7mm 140gr Apart
On impact, the nose cavity peels back into four razor-sharp petals that roughly double the bullet's diameter, dumping energy while the solid copper shank drives straight through. Because there's no lead core to separate from a jacket, weight retention sits right around 99 to 100 percent, which means deep, reliable penetration even on bigger-bodied animals. Those grooves in the shank aren't just for looks either, they cut down on bearing surface and help keep pressures and copper fouling in check. For a 7mm Rem Mag, 7mm-08, 280 Ackley, or one of the newer 7mm chamberings, this is a bullet that punches well above its weight.
Loading the Barnes 7mm 140 Grain TTSX
Copper monos reward a little extra jump, and this one is no exception. Barnes recommends starting around .050 inch off the lands, then fine-tuning anywhere from .030 to .070 inch to find the node your particular barrel likes. Some rifles shoot best seated even deeper, with the last relief groove nearly tucked into the case mouth, so don't be afraid to experiment. The bullet measures 1.361 inches long, which is worth keeping in mind for magazine fit and twist rate since copper bullets run longer than lead of the same weight. Work up your charge carefully and you'll likely land on a load that drills them.
Bottom line, if you handload for 7mm and want one bullet that shoots tight groups at the range and performs when it counts in the field, the 140gr TTSX earns its keep.
Key Specifications
- Manufacturer: Barnes
- Model: Tipped TSX (TTSX)
- Manufacturer Part Number: 30300
- UPC: 716876284740
- Caliber: 7mm
- Bullet Diameter: .284"
- Bullet Weight: 140 Grain
- Bullet Style: Tipped TSX Boat Tail, Polymer Tip
- Core / Jacket Material: 100% Copper, Lead-Free
- Ballistic Coefficient (G1): .412
- Sectional Density: .248
- Bullet Length: 1.361"
- Cannelure: Yes
- Recommended Use: Hunting
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TTSX 7mm (.284) 140gr Boat Tail bullets
Frequently Asked Questions
What seating depth works best for the Barnes TTSX 7mm 140gr?
Barnes recommends starting around .050 inch off the lands, then tuning between .030 and .070 inch to find your rifle's sweet spot. Copper bullets like a bit more jump than typical lead-core bullets, so give them room rather than jamming them into the rifling. Some handloaders get their best groups seating deeper, with the last relief groove nearly even with the case mouth, so it's worth testing a few lengths.
Is the Barnes 140gr TTSX lead-free?
Yes. The TTSX is built from a 100-percent copper body with no lead anywhere in the projectile. That construction is what gives it near 100-percent weight retention and deep, straight-line penetration.
What's the difference between the TTSX and the standard TSX?
Both share the same all-copper body with relief grooves cut into the shank and the same four-petal expansion. The TTSX adds a streamlined polymer tip that raises the ballistic coefficient for flatter long-range flight and initiates faster, more consistent expansion on impact.
What cartridges can I load these 140gr .284 bullets in?
Any 7mm chambering that suits a 140-grain bullet, including 7mm Rem Mag, 7mm-08, 280 Remington, 280 Ackley Improved, 7mm Weatherby Mag, and the newer 7mm PRC and backcountry cartridges. Since copper bullets run longer than lead of the same weight, just confirm your twist rate stabilizes it and that overall length fits your magazine.








Reviews
There are no reviews yet.