Description
Barnes designed the LRX, or Long-Range X, to keep pace with modern rifle accuracy and the extended-range optics most hunters are running these days. This 7mm (.284 diameter) 139-grain projectile is an all-copper, polymer-tipped boat tail that leans on a long, streamlined profile and a G1 ballistic coefficient of 0.470 to hold velocity and buck wind well past where a lot of lead-core bullets start to fade. Sectional density runs 0.246 and overall length measures 1.384 inches, so you have the numbers you need to work up a load and plan your trajectory.
What Sets the Barnes LRX 7mm Apart
The polymer tip does two jobs at once. It sharpens the aerodynamic profile for a higher BC, and it drives expansion the instant the bullet hits. Underneath that tip sits a scored nose cavity that peels open into four razor-sharp copper petals, opening up a wide wound channel and dumping energy through the full depth of the cavity. Because it is a monolithic copper bullet, weight retention stays high, which keeps momentum up for deep, reliable penetration on heavier game.
Loading and Shooting the 139gr LRX
Barnes machines these with their Accu-Groove relief rings, which cut down on fouling and bearing surface pressure while helping the bullet shoot accurately. A copper monolithic bullet seats a bit longer than a comparable lead-core projectile at the same weight, so pay attention to your seating depth and give it room off the lands as you develop. A twist rate around 1 in 9.5 inches or faster is recommended to stabilize this length. It is a strong match for cartridges like the 7mm-08, 7mm Rem Mag, 280 Ackley, and the 7 PRC when you want a lead-free bullet that stretches your effective range.
From whitetail out to elk, the LRX gives you handloader-level long-range precision with the clean, ethical terminal results Barnes built its name on. These come 50 projectiles to the box and are not loaded ammunition.
Key Specifications
- Manufacturer: Barnes
- Model: LRX (Long-Range X)
- Manufacturer Part Number: 30295
- UPC: 716876128419
- Caliber: 7mm
- Bullet Diameter: .284"
- Bullet Weight: 139 Grains
- Bullet Type: Polymer Tip Boat Tail
- Material: All-Copper, Lead Free
- G1 Ballistic Coefficient: 0.470
- Sectional Density: 0.246
- Overall Length: 1.384"
- Cannelure: No
- Recommended Twist Rate: 1 in 9.5" or faster
- Quantity: 50 per Box
What’s Included
- 50 Barnes LRX 7mm (.284) 139gr polymer-tipped boat tail bullets
Frequently Asked Questions
What ballistic coefficient does the Barnes LRX 7mm 139gr have?
This bullet carries a G1 ballistic coefficient of 0.470 with a sectional density of 0.246. That slick profile helps it hold velocity and resist wind drift at extended range, which is a big part of why the LRX line was built around modern long-range optics.
What twist rate do I need to stabilize the 139gr LRX?
A rifle twist of roughly 1 in 9.5 inches or faster is recommended to stabilize this bullet. Copper monolithic bullets are longer than lead-core bullets of the same weight, so they need a bit more spin than you might expect from the grain weight alone.
Is the Barnes LRX a lead-free bullet?
Yes, the LRX is an all-copper monolithic projectile with no lead core. On impact it opens into four razor-sharp petals while retaining nearly all of its weight, which gives you deep penetration and a wide wound channel.
What game is the 7mm 139gr LRX good for?
It works well across a wide range, from whitetail-sized medium game out to elk and other large game. The combination of controlled expansion, high weight retention, and a high BC makes it a solid choice for both close shots and longer pokes.






Reviews
There are no reviews yet.