Description
The Barnes TSX in 45-70 Govt is a 300-grain, all-copper flat nose bullet sized at .458 diameter, built for handloaders putting together serious big-game loads. There's no lead core and no jacket to separate here, just solid copper with a deep hollow point cavity that opens into four cutting petals. That construction is why these keep nearly all their weight after impact and drive straight through bone and heavy muscle instead of coming apart.
Why the TSX 45-70 Bullet Holds Together
The Triple-Shock X design carries multiple grooves cut into the shank, a feature Barnes calls the Accu-Groove system. Those rings give displaced copper somewhere to go as the bullet travels down the bore, which cuts fouling and helps a lot of rifles shoot tighter groups. Because there's no lead to shed, you get close to 100 percent weight retention and penetration that runs noticeably deeper than a conventional lead-core bullet of the same weight. The big flat nose and generous hollow point are a good match for the 45-70, giving reliable expansion even though this is a lower-velocity cartridge by nature.
Loading the 300gr .458 TSX
At 300 grains this is one of the lighter bullets 45-70 reloaders reach for, which lets you push velocity up a bit for better terminal performance. Handloaders have had good luck with powders like Vihtavuori N120, IMR 4198 and H4198, landing anywhere from the 1,900s to well over 2,000 fps depending on the rifle and load. Being copper, the bullet is a touch longer than a lead bullet of equal weight, so check your seating depth and crimp into the cannelure for consistent tension. These run well across lever guns like the Marlin 1895 and single-shots like the Ruger No. 1.
Specs worth noting: a sectional density of .204 and ballistic coefficient of .163. Whether you're chasing hogs, bear, elk, or moose in thick timber, this is a dependable choice for a hard-hitting 45-70 handload.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30630
- UPC: 716876458431
- Caliber: 45-70 Govt
- Bullet Diameter: .458
- Bullet Weight: 300 Grain
- Bullet Style: TSX Flat Base Flat Nose Hollow Point
- Core Material: Solid Copper
- Jacket Material: Solid Copper
- Construction: Lead-Free, All-Copper
- Cannelure: Yes
- Sectional Density: 0.204
- Ballistic Coefficient: 0.163
- Quantity: 20 Per Box
- Recommended Use: Hunting
What’s Included
- 20 Barnes TSX 45-70 Govt 300gr .458 copper bullets
Frequently Asked Questions
Are these Barnes TSX 45-70 bullets loaded ammunition or reloading components?
These are reloading bullets only, not loaded ammunition. You'll need your own brass, primers, and powder to assemble finished cartridges. They're intended for handloaders building their own 45-70 loads.
What makes the 300gr TSX different from a standard lead-core bullet?
The TSX is machined from solid copper with no lead core, so it holds nearly all of its weight and penetrates deeper than a comparable lead bullet. The Accu-Groove rings along the shank reduce fouling and often improve accuracy. On impact the hollow point peels back into four petals for reliable expansion.
What velocity do I need for the 45-70 300gr TSX to expand?
Barnes designed the flat nose 300gr TSX to open at relatively modest velocities thanks to its large hollow point cavity, which suits the lower-speed nature of the 45-70. Most handloads land it comfortably above typical expansion thresholds at practical hunting ranges. Pushing velocity a little higher within safe load data generally improves terminal performance.
Will these bullets work in a Marlin lever gun and a Ruger single-shot?
Yes. The 300gr .458 TSX is a popular choice across 45-70 platforms including the Marlin 1895 lever action and the Ruger No. 1. Since copper bullets run a bit longer than lead, confirm your seating depth and crimp into the cannelure for consistent results.




Reviews
There are no reviews yet.