Description
The Barnes 6mm (.243) 85gr TSX is a solid-copper hunting bullet that has earned its spot as one of the most trusted projectiles for the .243 Winchester, 6mm Creedmoor, 6mm Remington, and just about any 6mm wildcat you care to feed it. Barnes introduced the TSX back in 2003, and it quickly became their most popular hunting bullet thanks to its no-lead construction, deep penetration, and reputation for retaining nearly all of its weight after impact. Each box holds 50 bullets, measuring .243 inches in diameter with a listed overall length of 1.058 inches, a G1 ballistic coefficient of .333, and a sectional density of .206.
What Makes the 6mm 85gr TSX Hit Different
The magic is in the design. On impact, the hollow point nose peels back into four razor-sharp copper petals that cut a wide wound channel while the shank drives deep through bone and tissue. Because there's no lead core to separate from a jacket, these bullets stay together and keep pushing, which is exactly what you want when a shot angles through a shoulder or you're reaching out on a bigger-bodied animal. Expect near 100 percent weight retention and the kind of straight-line penetration that gives you confidence on game.
Why 6mm Reloaders Reach for the TSX Boat Tail
Barnes machines multiple grooves into the bullet shank, a feature they call Accu-Groove. Those rings act as relief valves as the copper flows under pressure down the bore, which cuts fouling, trims pressure, and helps these shoot tight groups. The boat tail heel adds a little aerodynamic help downrange too. Copper bullets like these often want a touch more jump to the lands and a bit of load development to find their sweet spot, so start low and work up with your preferred powder. Once you dial them in, they tend to reward you with consistent accuracy load after load.
This is a reloading component, not loaded ammunition, so you'll be seating these into your own prepped brass. For 6mm handloaders who want a lead-free, deep-driving hunting bullet, the TSX is a proven workhorse.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30212
- UPC: 716876243419
- Bullet Caliber: 6mm (.243)
- Bullet Diameter: 0.243 in
- Bullet Weight: 85 gr
- Bullet Type: TSX Boat Tail Hollow Point
- Core Material: Solid Copper
- Jacket Material: Solid Copper
- Lead Free: Yes
- Ballistic Coefficient (G1): 0.333
- Sectional Density: 0.206
- Overall Length: 1.058 in
- Cannelure: Yes
- Quantity: 50 per box
- Intended Use: Hunting
What’s Included
- 50 Barnes 6mm (.243) 85gr TSX Boat Tail Hollow Point bullets
Frequently Asked Questions
Are the Barnes 6mm 85gr TSX loaded rounds or just bullets?
These are reloading bullets only, not loaded ammunition. You'll seat them into your own prepped and primed 6mm brass as part of a handload. Each box contains 50 projectiles.
What cartridges can I load the 85gr TSX in?
This .243-diameter bullet works in any 6mm cartridge, including the .243 Winchester, 6mm Creedmoor, 6mm Remington, .243 WSSM, and a long list of 6mm wildcats. Barnes load data covers dozens of calibers for this bullet. As always, start with published starting loads and work up.
Why choose an all-copper TSX over a traditional lead-core bullet?
The solid copper TSX holds together through bone and tissue, retaining close to 100 percent of its weight for deep, straight penetration. On impact the nose opens into four sharp petals for a wide wound channel. It's also lead free, which some hunters prefer or require.
Do copper bullets like the TSX foul the barrel more?
The TSX is built to do the opposite. Barnes cuts multiple grooves into the shank that act as relief valves as the bullet travels down the bore, which reduces copper fouling and helps tame pressure. Many reloaders find they clean less often while still getting excellent accuracy.



Reviews
There are no reviews yet.