$139.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're running a BANISH HUB-compatible suppressor, this insert is the piece that makes the whole quick-detach system work. It threads into the rear of your can and gives the muzzle brake on your barrel a clean, industry-standard 1.375×24 interface to grab onto. Built from steel with a black oxide finish, it's made to take the heat and pressure of repeated use without wearing out.
On its own the insert looks simple, but it's doing important work. The muzzle brake wrench-tightens onto your barrel, and this insert stays threaded into the suppressor. When you spin the can onto the brake, the insert is what holds everything concentric and locked up tight, so your point of impact stays consistent and your baffles stay clear of the bullet path. It plays nice with cans like the BANISH 30-V2 and BANISH 30 Gold V2, along with other HUB-threaded models in the lineup.
The beauty of the HUB system is flexibility. One suppressor can run across multiple hosts as long as each barrel has a compatible brake, and there's a bonus most folks appreciate: the muzzle brake acts as a sort of sacrificial baffle, taking the brunt of the gas and even shaving a decibel or two off your sound signature. That's the kind of modularity that makes a single can feel like it works with your whole safe.
Setup is refreshingly straightforward. The included shim kit lets you time your muzzle brake to the correct orientation on the barrel, then you thread this insert into the back of the suppressor before mounting the can. BANISH recommends locking the brake in place with Rocksett or Red Loctite once your timing is dialed. A little trial and error with the shims gets you there, and after that it's a quick hand-tight spin every time you attach the suppressor.
It threads into the rear of your HUB-compatible BANISH suppressor and gives the muzzle brake on your barrel a 1.375×24 surface to attach to. Think of it as the go-between that keeps your can aligned and locked up when you mount it. Without it, the HUB-style quick-detach setup won't connect properly.
It's built for HUB-compatible BANISH suppressors that use the industry-standard 1.375×24 thread pitch. That includes models like the BANISH 30-V2 and BANISH 30 Gold V2, among others in the lineup. If your can has HUB threads, this insert is the right piece to complete the mount.
The included shim kit handles timing your muzzle brake to the barrel, but you'll want Rocksett or Red Loctite to lock the brake in its final position, and those aren't included. A 3/4-inch or crescent wrench helps snug the brake down. Once the brake is timed and set, the insert just threads into the can by hand.
It does. Beyond giving your suppressor a place to attach, the brake acts as a sort of sacrificial baffle that slows and redirects gas. It can even trim a decibel or two off your overall sound, so there's a small performance bonus on top of the convenience.
| UPC | 810171222053 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000310279 |
| Color | Black |
| Length | 3 |
| Model | |
| Package Height | 0.8 |
| Package Width | 2.2 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.078 |
You must be logged in to post a review.
Reviews
There are no reviews yet.