$34.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Nothing stalls a range day faster than realizing your suppressor threads don't match your barrel. This Banish thread adapter solves that exact headache, converting a 9/16×24 threaded muzzle to the far more common 5/8×24 pattern so your can, brake, or flash hider spins right on. It's a small piece of hardware that saves you from buying a second suppressor or paying a gunsmith to recut your threads.
Banish, the house brand from Silencer Central, machines these adapters from quality US steel and coats them in black oxide. That finish does more than look good against a threaded muzzle; it adds corrosion resistance and holds oil well, which matters on a part that lives at the dirtiest end of your rifle. Tolerances are held tight during production to keep the bore concentric between both thread patterns, because alignment is everything when a bullet is passing through a suppressor a few inches later. Wrench flats are built in so you can snug it down properly against the shoulder instead of relying on finger-tight and hope.
The 9/16×24 pattern shows up on a number of larger-bore rifle barrels, while 5/8×24 has become the standard for most 30 caliber suppressors and muzzle devices. If you own one good can and a couple of rifles with mismatched threads, an adapter like this is the cheapest versatility upgrade you can make. Install it, torque your suppressor down, confirm alignment, and get back to shooting.
At well under an ounce, this thing disappears in a range bag pocket. It works with any brand of direct thread 5/8×24 muzzle device, not just Banish suppressors, so it plays nice with whatever is already in your collection. Just match the adapter bore to your caliber, make sure your suppressor is rated for the cartridge, and you're set. Simple part, does its job, no drama.
It threads onto a barrel with a 9/16×24 muzzle thread and gives you a 5/8×24 male thread on the other end. That lets you mount common 5/8×24 suppressors, muzzle brakes, and other threaded devices on a barrel that otherwise wouldn't accept them. Double check your barrel's thread pitch before ordering, since 9/16×24 is less common than some other patterns.
Yes. Any direct thread muzzle device with a standard 5/8×24 thread will work, whether it's a Banish can or something from another manufacturer. Just make sure the adapter bore and your suppressor are both appropriate for the caliber you're shooting.
Thread it onto a clean, dry muzzle and use the wrench flats to seat it firmly against the barrel shoulder. Then install your suppressor or muzzle device onto the 5/8×24 end and confirm bore alignment before firing. Many folks add a dab of Rocksett if they want the adapter to stay put semi-permanently while still being removable with heat.
Cost and flexibility. Rethreading requires a gunsmith and permanently changes your barrel, while an adapter installs in minutes and can move between rifles or come off entirely. For most people running one suppressor across multiple guns, a quality steel adapter like this is the practical answer.
| UPC | 810171220622 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000310210 |
| Model | |
| Package Height | 4.8 |
| Package Width | 2.9 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.