$1,099.00
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Big-bore cans have always come with a trade-off: enough internal volume to tame a .45-70 or .338 Lapua usually means hanging a boat anchor off the end of your barrel. The Banish 46 V2 does away with that. At 8 inches long, 1.59 inches across, and just 15.3 ounces, it hangs off a lever gun or magnum bolt rifle without wrecking the balance, and it still delivers a solid 30 decibel reduction in sound. That is the kind of performance that turns a punishing range session into a pleasant one, and it takes a real bite out of felt recoil too.
With a .46 caliber bore, this can swallows just about anything smaller. Think .45-70 Government, 450 Bushmaster, .44 Magnum, .375 H&H, .338 Lapua, all the way down to common pistol rounds like 10mm and .45 ACP. It ships set up for direct thread with a 5/8×24 mount, and the industry-standard 1.375×24 HUB interface means you can swap in other mounting options, including a piston for tilting-barrel pistols. If you have been eyeing a shelf full of dedicated suppressors, this is the one-can answer.
The body and baffle stack are titanium alloy, which is how it stays under a pound while standing up to magnum pressures. The blast baffle, the part that takes the worst abuse, is 17-4 stainless steel. Smart material choices, not shortcuts. Compared to the original Banish 46, the V2 trims several ounces and slims the diameter while keeping the muscle for big cartridges.
Like the rest of the Banish line, this one comes apart by hand for full user servicing. The baffles are keyed and indexed, so everything lines back up correctly on reassembly without any guesswork. Toss the titanium internals in an ultrasonic cleaner or scrub them with a brush and solvent, put it back together, and you are ready for the next hunt. Made in the USA and backed by a lifetime warranty.
With its .46 caliber bore, it is rated for big rifle cartridges like .45-70 Government, 450 Bushmaster, .375 H&H, and .338 Lapua Magnum, plus pistol rounds like .44 Magnum, 10mm, and .45 ACP. Anything with a bullet diameter of .46 inch or smaller is fair game. That range is what makes it such a popular one-can solution.
The V2 drops the modular two-length design in favor of a fixed 8 inch configuration, which cuts weight to 15.3 ounces versus up to 20.4 ounces on the original. It also slims down from 1.73 to 1.59 inches in diameter. The trade-off is a 30 dB reduction instead of the original's peak 34.5 dB, but you get a noticeably handier package on the rifle.
Yes, it disassembles by hand for full user servicing, no gunsmith needed. The titanium baffles can go in an ultrasonic cleaner or a tumbler, or you can clean them the old-fashioned way with a brush and solvent. The baffles are keyed and indexed, so they only go back together the right way.
It ships as a direct-thread can with a 5/8×24 mount, which works great on fixed-barrel guns. For tilting-barrel semi-auto pistols like a .45 ACP or 10mm, the 1.375×24 HUB interface lets you run a Nielsen device (booster) so the action cycles reliably. Just keep in mind it is a bit more noticeable on a pistol than on a heavy rifle.
| UPC | 810171225733 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000111324 |
| ATF Type | Silencer |
| Caliber/Gauge | 46 Caliber |
| Color | Black |
| Length | 8 |
| Model | |
| Product Type | NFA – Silencer |
| Shipping Weight | 1.0 |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.