$102.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The BANISH 20 suppressor doesn't clamp onto your barrel or require any gunsmithing. It attaches through your shotgun's existing choke threads, and that's where this adapter comes in. This mount is cut for the Browning Invector DS system, the newer Browning thread pattern found on guns like the Citori 725 and current A5 models where the threads sit right at the muzzle. Spin it into the barrel like a choke tube, thread the suppressor onto the mount, and you're set for the dove field or the duck blind.
Because the BANISH 20 mounts through the choke system, the mount is what keeps everything aligned with the bore. A properly fitted, model-specific adapter like this one gives you a secure, repeatable attachment that keeps your point of aim consistent and your sight line down the rib completely clear. And since your pattern control moves to the choke tubes at the front of the suppressor itself, you're not giving up anything on constriction. You still pick your choke for the hunt, just at the other end of the can.
Here's the part a lot of folks appreciate: Silencer Central offers these BANISH 20 mounts in several thread patterns, including Benelli Crio Plus, Benelli Mobil, Beretta Optima HP, Browning Invector Plus, Remington 870, and this Invector DS version. Pick up a mount for each 20 gauge in the safe and one suppressor covers the whole lineup. Swap the can from your 725 to your buddy gun in a couple of minutes with nothing but your hands.
One quick note before you order. Invector DS is not the same as standard Invector or Invector Plus, and the three don't interchange. DS chokes are the long ones, roughly 2.75 inches, with the threads up at the top near the muzzle. Most Brownings have the choke system stamped on the barrel or monoblock, so take a quick look before you buy. If your 20 gauge says Invector DS, this is the right mount for your BANISH 20.
It fits 20 gauge shotguns threaded for the Browning Invector DS choke system, which Browning uses on guns like the Citori 725 and newer A5 models. DS threads sit at the muzzle end and the chokes run about 2.75 inches long, which sets them apart from standard Invector and Invector Plus. Check the stamp on your barrel or monoblock to confirm your gun is DS before ordering.
No. Invector, Invector Plus, and Invector DS are three different thread systems and they don't interchange. Banish makes a separate 20 gauge mount for Invector Plus, so grab that version if your barrel is stamped for it.
The mount does replace your barrel's choke tube, but you don't lose pattern control. The BANISH 20 uses its own screw-in choke tubes at the front of the suppressor, and it ships with Improved Cylinder, Modified, and Full options. You still tune your pattern for the hunt, just at the muzzle end of the can.
Yes, and that's exactly what these mounts are for. Banish offers them in multiple thread patterns including Benelli Crio Plus, Benelli Mobil, Beretta Optima HP, Remington 870, and both Browning Invector patterns. Keep a mount installed in each gun and the suppressor swaps between them in minutes with no tools.
| UPC | 810171227980 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350207 |
You must be logged in to post a review.
Reviews
There are no reviews yet.