$275.50
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Ballistic Advantage .308 Win 16" Hanson barrel is one of those parts that quietly does the heavy lifting in a DPMS-pattern AR-10 build. It runs BA's proprietary Hanson contour, which trims weight where you don't need it and keeps mass where it matters for stiffness and accuracy. Machined from 416R stainless steel and finished with a QPQ corrosion-resistant coating, it holds up to weather and range abuse without babying. Every Premium Black Series barrel gets HP (high pressure) and MPI (magnetic particle inspection) tested, so what shows up at your bench has already been vetted for strength and consistency.
At 16 inches with a mid-length gas system, this barrel hits a sweet spot for a .308 gas gun. The mid-length dwell smooths out the gas timing on the .308 platform, which tends to run harsh, and that translates to softer recoil impulse and easier extraction. The Hanson contour is designed specifically to its length and caliber, so you're getting a balance of handling and rigidity rather than a generic pencil or a boat-anchor bull barrel. It's a genuinely versatile setup for range work, hunting, or a general-purpose battle rifle.
The 1:10 twist is a smart middle ground for .308. It stabilizes the popular 168 and 175 grain match loads with room to spare, and it'll happily run heavier hunting projectiles up into the 200-plus grain range if you want more downrange authority. If you're feeding it factory 150 to 175 grain ammo, you'll be in good shape from the start.
The barrel ships with a pinned low-profile .875" gas block already installed, along with a gas block retaining pin, which saves you the fuss of aligning and pinning your own. Muzzle threads are the standard 5/8×24 for .308, so your favorite brake, flash hider, or suppressor mount will thread right on. Keep in mind this is a direct-impingement barrel and isn't set up for aftermarket piston kits. Drop it into a DPMS Gen 1 pattern receiver and you've got a solid backbone for the build.
It's built for DPMS Gen 1 pattern AR-10 receivers, which is the most common large-frame .308 standard. Make sure your upper receiver and bolt are DPMS pattern before ordering. Mixing large-frame standards is the number one headache in .308 builds, so confirm your parts match.
Yes. This one ships with a pinned low-profile .875" gas block already installed, plus a gas block retaining pin. That saves you from dimpling, aligning, and pinning your own block, which is a nice time-saver on assembly day.
The 1:10 twist handles the popular 168 and 175 grain match loads with ease and will stabilize heavier hunting bullets into the 200-plus grain range. Standard 150 to 175 grain factory ammo is a safe starting point. It's a versatile twist that covers most of what people run through a .308.
Absolutely. The muzzle is threaded 5/8×24, which is the standard .308 thread pitch, so most brakes, flash hiders, and suppressor mounts will thread right on. Just note this is a direct-impingement barrel and isn't designed to run with aftermarket piston kits.
| UPC | 819747024336 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BABL308017PQ |
| Product Type | Barrel |
| Model | |
| Color | Black |
| Caliber/Gauge | .308 / 7.62 NATO |
| Barrel Length | 16" |
| Length | 16 |
You must be logged in to post a review.
Reviews
There are no reviews yet.