$299.25
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This Ballistic Advantage Premium Series barrel is built for people who want accuracy on a modern AR platform. The 22-inch length hits that sweet spot most folks are looking for—you get solid velocity and excellent handling without a front-end heavy rifle that becomes a hassle to manage.
The barrel uses 416R stainless steel with a heavy contour profile, designed to minimize vibration and provide thermal stability shot after shot. Ballistic Advantage machines each barrel from a blank to achieve its fullest potential, then finishes it with a bead-blasted surface that resists corrosion while keeping a low-glare appearance. This isn't just looks—stainless steel barrels are known for their accuracy potential, taking more defined rifling cuts than softer alternatives.
Swapping to 6.5 Creedmoor means you keep everything else from a standard .308 AR-10 setup. Your bolt, magazines, and receiver stay the same. The real difference is what the round delivers: inherently accurate 6.5mm projectiles, widely available match-grade ammunition, and significantly softer recoil. You get roughly 33% less felt recoil than standard .308, which means faster follow-up shots and less shoulder punishment during extended shooting.
The 1:8 twist rate stabilizes a wide range of 6.5 Creedmoor bullet weights, with the 130 to 140-grain range being optimal. The recessed 11-degree target crown and rifle-length gas system work together to support precision shooting from 300 yards out past 600, with the ballistics to stay supersonic well beyond typical range distances. Every barrel is proof fired and MPI tested before it leaves the shop, backed by Ballistic Advantage's sub-MOA accuracy guarantee with match-grade ammunition.
The 1:8 twist rate is optimized for 130 to 140-grain bullets. Match-grade factory ammunition from manufacturers like Hornady and Winchester will chamber properly and deliver the sub-MOA accuracy Ballistic Advantage guarantees. If you reload, you'll need full-length sizing for semi-auto AR feeding rather than neck sizing alone.
Yes, the heavy profile design requires a .936-inch diameter gas block. This is a standard AR-10 size, but it's not interchangeable with the smaller .750-inch blocks used on some mid-length barrels, so verify your gas block before installation.
With quality ammunition and proper setup, this barrel will hold sub-MOA groups and performs well for precision shooting out to 600 yards and beyond. The 22-inch length with 1:8 twist achieves excellent velocity—typically 2,700-2,800 fps with 140-grain loads—which maintains supersonic flight well past 1,200 yards for longer-range applications.
The heavy contour reduces vibration and thermal drift for better consistency, especially during extended shooting sessions. The tradeoff is added weight on the front of the rifle. Most users find the 22-inch length with this profile offers good balance between accuracy stability and manageability without becoming unwieldy.
| UPC | 819747024817 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BABL65CR03P |
| Caliber/Gauge | 6.5mm Creedmoor |
| Length | 22'' |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.