Description
When you're mounting an optic, snugging up ring caps, or chasing down a stubborn set screw, the last thing you want is a sloppy-fitting wrench rounding out a screw head. This 13-piece Bondhus Balldriver set covers the SAE sizes that show up most on rifles, handguns, and accessories, and the ball ends make quick work of screws you can't hit dead-on.
What Sets the Balldriver Apart
The ball-end design is the whole story here. That rounded tip lets the wrench enter a socket-head screw at an angle up to 25 degrees, so you can start and back out fasteners without lining the tool up perfectly square. That's a real advantage when you're working around a scope tube, tucked into a receiver, or reaching a screw buried under a rail. When you need max torque on a tight screw, just flip to the short straight end for a proper 90-degree bite.
Steel That Holds Up on the Bench
Bondhus makes these from their proprietary Protanium high-torque steel, which they rate as up to 20 percent stronger than the standard steel other brands use. The ProGuard dry finish handles rust and corrosion protection, which matters when your tools live in a shop that sees solvent, oil, and humidity. Bondhus has been building the Balldriver since 1964 and backs these tools with a reputation earned across auto shops, bike shops, and gun benches worldwide.
Sizes and the Bondhex Case
The set runs .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" in long-arm length for extra reach and leverage. Everything rides in a yellow Bondhex case that locks each wrench into a labeled slot with a twist, so you can grab the size you need at a glance instead of digging through a drawer. That yellow color-coding is Bondhus shorthand for inch sizes, handy if you keep a metric set alongside it.
Key Specifications
- Manufacturer: Bondhus
- Manufacturer Part Number: 10937 (BLX13)
- UPC: 037231109370
- Quantity: 13 pieces
- Measurement System: SAE (Inch)
- Size Range: .050" to 3/8"
- Included Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in
- Tip Style: Ball End / Hex
- Entry Angle: Up to 25 degrees
- Arm Length: Long
- Material: Protanium High Torque Alloy Steel
- Finish: ProGuard corrosion-resistant
- Case Color: Yellow (inch)
- Country of Origin: USA
What’s Included
- 13 Balldriver ball-end SAE hex L-wrenches (.050" to 3/8")
- Yellow color-coded Bondhex storage case
Frequently Asked Questions
Is the Bondhus Balldriver set a good fit for mounting scopes and optics?
Yes, it covers the common SAE hex sizes you'll run into on scope rings, bases, and rail hardware. The ball ends help you reach ring cap screws that are hard to line up square, then you flip to the short straight end for final tightening. If you're chasing a specific torque spec, pair it with an inch-pound torque wrench for the last snug-up.
What does the ball end actually do?
The rounded ball tip lets the wrench engage a socket-head screw at an angle up to 25 degrees instead of dead-on. That saves time getting fasteners started and backing them out in tight spots. Just keep in mind you'll want the straight hex end when you need to apply maximum torque.
Is this an SAE (inch) set or metric?
This is the SAE inch set, running from .050" up to 3/8" across 13 wrenches. The yellow Bondhex case is Bondhus's color code for inch sizes, which makes it easy to tell apart from a metric set on the bench. If you work on gear that uses metric fasteners, you'd want to add a separate metric set.
Where are Bondhus Balldriver wrenches made and how tough are they?
They're made in the USA from Bondhus's proprietary Protanium high-torque steel, which the company rates as up to 20 percent stronger than standard tool steel. The ProGuard finish adds solid rust and corrosion protection for shop life. Bondhus has been producing the Balldriver since 1964 and stands behind the tools with a strong reputation.




Reviews
There are no reviews yet.