Description
The Axcel Driver CK is Axcel's answer to a common bowhunter gripe: sliders that add clutter and weight to your bow. It strips the design down to the essentials and lands at just 8.6 ounces, which is about as light as a full-featured slider gets. High-grade aluminum keeps it rugged, and the Midnight Cerakote finish gives it a clean, blacked-out look that holds up to the abuse of a hard hunting season. This version comes with the AccuStat II scope in a 4-pin, .019 configuration and mounts to your bow's Picatinny rail.
What Sets the Driver CK Apart
Axcel took a less-is-more approach here, cutting down on screws and micro parts compared to most sights in this class. That means fewer things to work loose and a faster, more intuitive setup. The controls are consolidated into one centralized area, and the shortened, narrower body gives you extra quiver clearance while keeping things maneuverable in tight spots or a treestand.
Dialing In the AccuStat II Scope
The 1.75-inch AccuStat II housing runs Axcel's one-piece FirePin design wrapped in roughly 26 inches of fiber, so your pins light up bright even in low light at dawn or dusk. A sliding rheostat cover lets you tune pin brightness and cut down on starbursting in full sun. The .019 pins are micro-adjustable, so you can move one at a time or the whole group with a simple loosen, move, tighten. An engraved torque ring indicator helps you line up your peep the same way every time, and the in-line level keeps your shots honest.
Fast, Precise Adjustment in the Field
The large drive wheel with rubber tread runs your elevation from top to bottom in about three-quarters of a turn, and the Micro Deadstop lets you set a hard 20-yard return point you can find without looking. Axcel machined the scope receiver perfectly perpendicular to the elevation bar, so leveling both the first and second axes happens with a single adjustment. It is a slick bit of engineering that takes the guesswork out of getting square. For the hunter who wants tournament-grade precision in a lightweight package, the Driver CK earns its spot.
Key Specifications
- Manufacturer: Axcel
- Manufacturer Part Number: ADVR-P419-4MD
- UPC: 611254513453
- Scope: AccuStat II
- Scope Housing Diameter: 1.75 in (41mm)
- Pin Configuration: 4 Pin
- Pin Diameter: .019 in
- Mount Type: Picatinny
- Finish: Midnight Cerakote
- Weight: Approx. 8.6 oz
- Construction: High-grade aluminum
- Fiber: One-piece FirePin, approx. 26 in
- Elevation: Large drive wheel, top to bottom in about 3/4 turn
- Axis Adjustment: Combined 1st/2nd axis, removable 3rd axis block
- Brightness Control: Sliding rheostat cover
What’s Included
- Axcel Driver CK sight body with Picatinny mount
- AccuStat II scope with 4 .019 pins
- In-line sight level
- Micro Deadstop
- Instruction manual
Frequently Asked Questions
What bows does the Axcel Driver CK Picatinny sight fit?
This version mounts to any bow set up with a Picatinny dovetail rail, which covers a wide range of compound bows. Since the mount is standard Picatinny, you are not locked into a single brand. If your bow uses a Bridge-Lock or standard dovetail instead, Axcel offers the Driver in those mounting options as well.
How does the axis leveling work on the Driver CK if there's no separate second axis screw?
Axcel machined the scope receiver perfectly perpendicular to the vertical elevation bar, so the scope stays square through the full range of travel. That lets you level both the first and second axes by adjusting the first axis alone. It is one of the reasons the sight has fewer parts and a faster setup than most sliders in its class.
Is the .019 pin AccuStat II bright enough for low light?
The AccuStat II uses a one-piece FirePin design wrapped with roughly 26 inches of fiber, which is a big part of why Axcel scopes are known for bright pins. The .019 pins gather plenty of light at dawn and dusk while staying crisp. A sliding rheostat cover lets you dial the brightness down in full sun so the pins don't starburst on you.
How light is the Axcel Driver CK compared to other slider sights?
The Driver comes in around 8.6 ounces, which made it the lightest slider sight on the market at release. Axcel got there by cutting down on hardware and moving parts without giving up durability or features. That weight savings is noticeable on long pack-ins and lets you add mass elsewhere on the bow if you want it.







Reviews
There are no reviews yet.