0
0

Area 419 Sidewinder Magnum Muzzle Brake .338 Cal 3/4-24 Black Nitride

UPC: 810080180253

$195.00

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Area 419 Sidewinder Magnum was built for the big-bore crowd, the folks running .338 Lapua, .338 Norma, .338 Win Mag, and everything in that neighborhood. It takes the recoil that normally leaves a bruise and turns it into something you can actually spot your own impacts through. This is the larger sibling to Area 419's popular Hellfire brake, using the same patent-pending self-timing technology but with an extra port and a bigger diameter, so you get a real jump in recoil reduction on hard-hitting cartridges.

What Makes the Sidewinder Self-Timing System Tick

The magic here is the two-piece setup. You torque the included universal adapter onto your barrel with a wrench and it stays put permanently. Then you left-hand thread the brake and collar assembly onto that adapter, rotate the brake until it's dead level, push it onto the taper until it locks, and hand-tighten the knurled collar. No tools to time it, no shims, no guessing where the ports will land. Because the brake locks to the taper before the collar snugs down, it won't rotate on you as you tighten it. Pull it off to clean or run a suppressor mount down the road and it returns to zero when you reinstall.

Porting That Actually Fights Recoil

Area 419 sized the ports on purpose. The first port is largest since a brake does its best work closest to the muzzle, then each following port steps down slightly. That keeps recoil reduction high without making the brake any longer than it needs to be. All ports face rearward for maximum recoil abatement, and the proprietary design keeps muzzle rise in check without top porting.

Built From the Right Materials

This .338 version is machined from heat-treated 17-4PH stainless steel and wears a Black Nitride finish that shrugs off wear and corrosion. It comes cut for a 3/4-24 thread pitch and the 338 bore handles any bullet caliber up to and including .338. Keep the adapter taper clean when you clean your barrel and this brake will run for years.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-SW-338-BN-3424
  • UPC: 810080180253
  • Caliber: .338 (handles up to and including .338 bullets)
  • Thread Pitch: 3/4-24
  • Material: Heat-treated 17-4PH stainless steel
  • Finish: Black Nitride
  • Timing: Self-timing collar and universal adapter system
  • Port Design: Rearward-facing progressive ports
  • Return to Zero: Yes, repeatable after removal
  • System Compatibility: Area 419 Modular Sidewinder System (not interchangeable with Hellfire)
  • Country of Origin: Made in USA

What’s Included

  • Sidewinder Magnum .338 caliber muzzle brake body (Black Nitride)
  • One universal adapter (3/4-24 thread pitch)
  • Self-timing collar

Frequently Asked Questions

How does the Sidewinder Magnum self-timing system work without shims or washers?

You torque the universal adapter onto your barrel once and leave it there. The brake and collar assembly threads onto that adapter and locks onto a machined taper when you push it level, then a hand-tightened knurled collar holds it in place. Because it locks to the taper first, the brake won't spin out of alignment as you snug the collar down.

Will my .338 rifle return to zero if I remove and reinstall the brake?

Yes. Area 419 designed the Sidewinder so removal and reinstallation don't require a zero change. The taper-lock design indexes the brake back to the same position every time, which is handy if you pull it for cleaning or storage.

What calibers does the .338 Sidewinder Magnum brake work with?

The 338 bore is good for any bullet caliber up to and including .338, so it covers cartridges like .338 Lapua Magnum, .338 Norma, .338 Win Mag, and .338 Edge. You can also run smaller bullets through it. Just make sure your barrel is threaded 3/4-24 to match this version's adapter.

Is the Sidewinder adapter compatible with Area 419 Hellfire parts?

No. Both the Sidewinder and Hellfire use Area 419's patent-pending self-timing technology, but their system parts are not interchangeable. The Sidewinder is the larger design built for magnum recoil, with an extra port and bigger diameter than the Hellfire.

Additional information

UPC

810080180253

Manufacturer

Manufacturer Part Number

419-SW-338-BN-3424

Shipping Weight

5.66

Reviews

There are no reviews yet.

Be the first to review “Area 419 Sidewinder Magnum Muzzle Brake .338 Cal 3/4-24 Black Nitride”