$195.00
14 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Area 419 built its reputation on the original Hellfire back in 2016, and the Hellfire Match is the flagship that came out of years of refinement. Instead of just adding more of the same ports, the crew reworked the whole geometry. This is a four-port design where each port is genuinely different, using varied lengths, angles, and heights so every one is tuned to the pressure and gas volume it sees at that spot on the brake. The payoff is serious recoil reduction and flatter muzzle rise without dumping extra concussion back at your position. Feedback from owners running everything from .308 to 300 Win Mag and 7mm Rem Mag is consistent: recoil drops dramatically and follow-up shots get a whole lot easier.
The self-timing system is the big draw. You torque the Universal Adapter onto your threaded muzzle first, then the brake locks onto a machined taper and times itself level using a knurled collar you tighten by hand. No shims, no crush washers, no guessing where the ports land when you snug it down. Return to zero is excellent too, so you can pull the brake and reinstall it without chasing your zero all over the target.
This version is threaded 5/8-24 and wears a black nitride finish, which shrugs off carbon and cleans up easier than raw stainless. The 30-caliber bore handles any bullet up to and including .308, so it covers 7mm, .284, .270, and the magnums in that family. Because it runs the Hellfire Universal Adapter platform, the same mount works across Area 419's other Hellfire brakes, the 2P, the linear flash suppressor, and their suppressor mounts. If you already run their ecosystem, swapping devices is quick.
This is a precision and competition-minded brake, at home on PRS rigs, hunting builds, and any bolt gun where staying on target matters. It carries a little more weight than a titanium option, but the trade is rock-solid modularity and machining that owners regularly call top notch. Just remember it's a brake, so ear protection is a must every time you're behind it.
You thread the Universal Adapter onto your muzzle first using a 5/8-24 wrench, then thread the brake and collar assembly on and rotate the brake until it sits level. Push it in to lock onto the taper and tighten the knurled collar by hand. No tools, shims, or crush washers are needed to time it, and the brake won't rotate out of position as you snug it down.
This is the 30-caliber bore, which covers any bullet up to and including .308. That includes cartridges like 7mm, .284, and .270, and it handles the magnums in that family such as 300 Win Mag and 300 PRC. It's threaded 5/8-24, so make sure your barrel is threaded to match.
Yes. The Hellfire Match runs on the same Hellfire Universal Adapter system used across Area 419's lineup, so it integrates with their suppressor mounts, the original Hellfire, the Hellfire 2P, and the linear flash suppressor. If you already own their adapters, you can swap devices without buying a whole new setup.
Return to zero on the Hellfire Match is excellent. Because the brake locks onto a machined taper on the adapter, you can pull it and reinstall it without needing to re-verify your zero. That makes it handy if you clean the brake regularly or move it between setups.
| UPC | 810080180697 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419HFMAT-30-5824 |
| Shipping Weight | 0.45 |
You must be logged in to post a review.
Reviews
There are no reviews yet.