0
0

Area 419 ZERO S-Series 6mm BR Full-Length Sizing Die

UPC: 810080183117

$275.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built the ZERO S-Series around a simple idea: take the features that made their M-Series die a favorite among precision reloaders and fit them into a traditional 7/8-inch body that works with a wider range of presses. For the 6mm BR crowd, that means a full-length die that sizes the case from the neck all the way down toward the extractor, keeping your brass chambering clean even after multiple firings instead of giving you that sticky bolt a lot of standard dies develop by the second or third reload.

What Sets the 6 BR S-Series Die Apart

The body is reamer cut to exact dimensions for a true full-length size, so your brass comes out uniform and ready to chamber. Inside, a precision-ground expander mandrel sets your neck tension, and every die ships with a .002-inch mandrel to start. Want to fine-tune your tension? Area 419's separate mandrel kit lets you dial it in across different increments without buying a whole new die. There's also a hydraulic shoulder pressure relief setup that helps keep shoulder bump consistent across a batch, which is exactly what the 6 BR benchrest and PRS crowd is chasing.

Living With the S-Series 6 BR Die

The little details show the die was made by people who actually reload. Spent primers get kicked out by spring ejection, and the steel decapping pins are replaceable, so a bent pin isn't a crisis. Feedback from folks running these dies points to near-zero runout and neck tension that stays steady across an entire batch of brass, even on a basic single-stage press.

This is a die-only product and does not include a shellholder. It plays nice with common shellholders from Redding, Hornady, RCBS, and others, and it also fits the ZERO Modular Shellholder System if you're already in the Area 419 ecosystem. Every S-Series die is made in America.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-ZERODIE-S6BR
  • UPC: 810080183117
  • Cartridge: 6mm BR
  • Die Style: Full-Length Sizing Die
  • Die Body: 7/8-inch thread
  • Material: Stainless Steel
  • Included Mandrel: .002-inch neck tension
  • Decapping Pin: Replaceable steel
  • Shellholder: Not included; works with Redding, Hornady, RCBS and ZERO Modular system
  • Country of Origin: Made in USA

What’s Included

  • Area 419 ZERO S-Series 6mm BR sizing die
  • ZERO Universal Die Ring
  • .002-inch neck tension expander mandrel
  • Spare decapping pin
  • Necessary install/removal tools

Frequently Asked Questions

Does the Area 419 6 BR S-Series die come with a shellholder?

No, this is a die-only product and does not include a shellholder. It works with common shellholders from Redding, Hornady, RCBS, and similar brands. It's also compatible with the Area 419 ZERO Modular Shellholder System if you're already running their gear.

What neck tension does the S-Series 6 BR die set up for?

Every die ships with a precision-ground .002-inch neck tension mandrel, which is a solid starting point for most 6 BR loads. If you want to adjust tension up or down, Area 419 offers a separate mandrel kit that gives you additional increments without needing a new die.

Will this die fit a standard press?

Yes, the S-Series uses a traditional 7/8-inch die body, which is the standard thread found on most common single-stage and turret presses. This is the big difference from the M-Series, which uses a larger 1-1/4-inch body that needs a specific turret or press setup.

Does the Area 419 6 BR die size the full case body?

It does. The die is reamer cut to exact dimensions and sizes the brass full-length from the neck down toward the extractor, which helps prevent that sticky bolt feel a lot of reloaders run into after a couple of firings. That full-length approach keeps your 6 BR brass chambering smooth across repeated reloads.

Additional information

UPC

810080183117

Manufacturer

Manufacturer Part Number

419-ZERODIE-S6BR

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO S-Series 6mm BR Full-Length Sizing Die”