$188.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is the gas block builders reach for when they want real control over how their AR-15, AR-10, or LR-308 cycles. Instead of restricting gas flow the way most adjustable blocks do, Superlative Arms uses a patented Bleed Off design that vents the extra gas forward and out the front of the block. The system only sends back the pressure needed to drive the bolt carrier, and everything else gets bled off. The payoff is an action that runs cleaner and cooler, with noticeably less felt recoil and faster follow-up shots.
Because the adjustment screw doesn't sit in the gas stream, it never sees the erosion, seizing, or carbon buildup that plagues conventional restrictive blocks. The adjustment detent lives outside the gas path, so it stays contamination-free and keeps a crisp, positive click at every setting. That means your tune holds where you left it instead of drifting loose over a long range session. You can also run it in restrictive mode if you prefer, though Bleed Off is the mode the design is built around.
Machined from ultra-tough, lightweight titanium and finished in a gray DLC coating, this block keeps weight down out at the muzzle end where it matters for balance. The .875" bore is sized for heavier and larger-diameter barrels, and the clamp-on mount grips the barrel evenly without relying on dimples or divots. Because the adjustment mechanism raises the gas tube entry slightly higher than a standard block, a straight gas tube is the right pairing for the .875" size.
This block is a favorite for suppressed guns, SBRs, pistol-length builds, and pencil-profile barrels where dialing in the gas makes a big difference in how the rifle feels. It ships with the tool you need to adjust it, and on shorter setups you can often tune it without pulling the handguard. Start closed, back it out to full open, then walk it in until the action runs the way you want. Set it once for your load and suppressor combo and it'll stay put.
Most adjustable blocks work by restricting the gas flow, which chokes the system down and can erode or seize the adjustment screw over time. This Superlative Arms block instead bleeds the extra gas forward and out the front, sending only the pressure needed to cycle the bolt carrier. That keeps the action cleaner and cooler and keeps the adjustment screw out of the harsh gas stream. The detent also sits outside the block, so carbon buildup won't cause it to lose its setting.
This block is bored for .875" diameter barrels, which is common on heavier and larger-profile barrels. Because the adjustment mechanism raises the gas tube entry a bit higher than a standard block, Superlative Arms recommends a straight gas tube with the .875" size. Double-check your barrel's journal diameter before ordering so you get the correct fit.
Yes, this is one of the go-to blocks for suppressed guns, SBRs, and pistol-length setups. Being able to dial back the gas reduces blowback, felt recoil, and heat, which is exactly what you want when running a can or a short gas system. On shorter handguards you can often reach the adjustment without pulling the rail.
The clamp-on design grips the barrel evenly and doesn't rely on dimpling the barrel, and the external detent gives each setting a positive click. Users consistently report it stays put and doesn't loosen up over time the way some other adjustable blocks do. Set it for your load, snug the hardware to spec, and it should stay right where you left it.
| UPC | 850011846469 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-875CGT |
| Style | Clamp-On |
You must be logged in to post a review.
Reviews
There are no reviews yet.